Drive Jumpering for the SB180 Tandon 65-2 and Canon 211 drives don't work on the SB180. 5.25" 48tpi drives: TEAC FD-55B-20-U : ML,UR,DSx TEAC FD-55B-01-U : HM,SM,UR,PM,DSx TEAC FD-55B-01-U (other one) : HM,ST,DSx TEAC FD-55BV-06-U : HL,RY,DSx TEAC FD-55BV-36-U : HL,RY,DSx Matsushita JA-551-3 : DSx,DS,+WP,MM,IU Matsushita JA-551-045 : DSx,DS,WP,MM,DR,RD,RY Shugart SA450 : DSx,DS,MM,IU Shugart SA455-3CAE : DSx,DS,+WP,MM,IU Mitsubishi M4851-112U : DSx,2S,MM,HM 5.25" 96tpi drives: TEAC FD-55F-03-U : HM,SM,UR,PM,DSx 8" drives: Shugart SA851 : DSx,850,2S,Z,A,B,I,R,IW, S2,IT,C,RS,HLL,M,NF The following configurations were submitted by SB180 users and have not been verified by Micromint: 5.25" 48tpi drives: Qume 542 : HM,DSx,HL 5.25" 96tpi drives: Mitsubishi M4853 : HM,MM,H2,R3,DSx 8" drives: Shugart SA801 : DSx,800,A,B,C,Z,DS,L Shugart 860-1 : DSx,MS,Z,MD,SR,S2,2S,B,A Qume 842 : DSx,2S,A,B,C,D,Y,R,I Notes: 1) The DSx entry used throughout signifies the appropriate drive select option for the location of the drive in your system. Most drives have either DS0,DS1,DS2,DS3 or DS1,DS2,DS3,DS4. 2) The terminator pack, if present, should be installed on the drive physically at the end of the cable only. It should be removed from all other drives on the system.