3-Jan-93 23:49:02-MST,12077;000000000000 Return-Path: Date: Sun, 3 Jan 93 23:45:15 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #1 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930103234515.V93N1@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Sun, 3 Jan 93 Volume 93 : Issue 1 Today's Topics: kaypro 4 for sale Osborne1 disk translation help Power requirements? sale apple 111 cp/m sale epson cp/m laptop terminals\modems for sale What is the legal status of CP/M? Wither S-100 HD controllers? Xerox System+Printer For Sale (in LA) Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 3 Jan 93 05:45:03 GMT From: uunet.ca!canrem!dosgate!dosgate![wr.campbell%canrem.com]@uunet.uu.net (wr campbell) Subject: kaypro 4 for sale Message-ID: <1993Jan3.4443.3293@dosgate> FOR SALE -------- Kaypro 4 portable computer. (circa 1984-85). Has keyboard, two 5 1/4" diskette drives, 8" screen (no burn-in). Parallel and serial ports. Comes with CP/M software and manuals. In good condition. I need the space, so make an offer. thanks ob --- ~ SLMR 2.1a ~ Maple Grove, Ontario: Whiffle through the tulgey wood. -- Canada Remote Systems - Toronto, Ontario World's Largest PCBOARD System - 416-629-7000/629-7044 ------------------------------ Date: 3 Jan 93 14:47:00 GMT From: ehbbs!curt.tucker@uunet.uu.net (Curt Tucker) Subject: Osborne1 disk translation help Message-ID: <1465.544.uupcb@ehbbs.gwinnett.com> I'm trying to get some advice on how to translate some old SSSD 5.25" Osborne1 CPM disks to MS-DOS readable ones. Does anyone know of an Osborne User Group or BBS? There do exist some CPM conversion utilities (ala 22DISK) which will run on a PC, but these will *not* convert the older (early model Osborne1) SS floppies without some kind of surgery to the PC floppy controller to allow it do deal with a single-sided disk. We have an ancient copy of Crosstalk that actually runs on the Osborne, but we can't get it to drive an external modem. The machine with this software did drive the modem a decade ago, but we've completely forgotten how it was set up. Maybe a bad serial port? The disks to be converted are old WordStar document files which have both personal and professional value. The floppy drives on this machine sound like they're grinding rocks, and it can't last forever. I'd appreciate any help or suggestions. Thanks muchly. --Curt-- curt.tucker@ehbbs.gwinnett.com --- . QMPro 1.01 . That frozen concoction that helps me hang on ---- +-----------------------------------------------------------------------+ | Ed Hopper's BBS - ehbbs.gwinnett.com - Atlanta, Georgia | | USR/HST: 404-446-9462 V.32bis: 404-446-9465 | +-----------------------------------------------------------------------+ ------------------------------ Date: 2 Jan 93 18:24:48 GMT From: destroyer!caen!sdd.hp.com!news.cs.indiana.edu!babbage.ece.uc.edu!uceng.uc.edu!schriste@gatech.edu (Steven Christensen) Subject: Power requirements? Message-ID: Hi, I recently acquired a six-slot S-100 card cage, sans power supply. It has connections for +8, Gnd, +16, and -16. Since each card has it's own regulator, I was wondering how strict these voltages need to be. For example, can I use +18, -18 and +7.6 volts? What kind of current am I expected to provide? Thanks, Steven -- Steven V. Christensen schriste@uceng.uc.edu ------------------------------ Date: 2 Jan 93 03:53:55 GMT From: uunet.ca!canrem!dosgate!dosgate![tony.camara%canrem.com]@uunet.uu.net (tony camara) Subject: sale apple 111 cp/m Message-ID: <1993Jan1.4443.3288@dosgate> FOR SALE Have a APPLE 111 computer with built in drive. Comes with a 9 MEG HD. Also has a special APPLE Soft Card 111 System board. It converts SOS DOS to CP/M. So one can use CP/M programs on this APPLE. Has all the books and docs for the card,also the discetts. Dont have monitor. Ill like to get at least $75.00 bucks for the whole thing..... Call me at 271-7780 or 891-9013 MISSISSAUGA ONT. THANKS -=TONY=- -- Canada Remote Systems - Toronto, Ontario World's Largest PCBOARD System - 416-629-7000/629-7044 ------------------------------ Date: 2 Jan 93 03:53:55 GMT From: uunet.ca!canrem!dosgate!dosgate![tony.camara%canrem.com]@uunet.uu.net (tony camara) Subject: sale epson cp/m laptop Message-ID: <19931.4443.3287@dosgate> For sale. EPSON PX-8 Portable CP/M Laptop computer. With the EPSON LetterJet portable ink jet PRINTER. Has all the documents and manuals. Comes with builtin WordStar, word procesing program. Also a spredsheat and scheduler programs built-in. Has a MICRO CASSETTE drive and a Flipup CRT screen. Program was updated in 1988. (EPROM'S) Has RS232C and serial ports. Has speaker, a/d in, and BRCD plugs. Comes with a 64K ROM drive, expandable to 120K. Good batteries on laptop and printer, with chargers and ALL cables. About the same size as a SMALL T1100 or 1200 laptop. Have ink refill for the ink jet printer. All in good shape just don't know how to play with it. Also the printer works with all computers. ASKING $200 OR B.O. WILL NOT SEPARATE !! CALL ME AT 271-7780 OR 891-9013 MISSISSAUGA ONT. THANKS -=TONY=- -- Canada Remote Systems - Toronto, Ontario World's Largest PCBOARD System - 416-629-7000/629-7044 ------------------------------ Date: 3 Jan 93 15:57:26 GMT From: uunet.ca!canrem!dosgate!dosgate![wr.campbell%canrem.com]@uunet.uu.net (wr campbell) Subject: terminals\modems for sale Message-ID: <1993Jan3.4443.3295@dosgate> For Sale -------- Qume model 102A terminal. Clean, no screen burn-in. Has one key that doesn't return. TTX model 3000 terminal. Clean, no screen burn-in. Has a sticky key. One pair of Gandalf LDS319 modems. Speeds up to 19.2 on 4-wire connection. Cleaning house and need the space. Make an offer. thanks Bob --- ~ SLMR 2.1a ~ Maple Grove, Ontario: O frabjous day! Callooh! Callay! -- Canada Remote Systems - Toronto, Ontario World's Largest PCBOARD System - 416-629-7000/629-7044 ------------------------------ Date: 4 Jan 93 05:30:12 GMT From: saimiri.primate.wisc.edu!usenet.coe.montana.edu!giac1.oscs.montana.edu!uesu03@ames.arc.nasa.gov (Lou Glassy) Subject: What is the legal status of CP/M? Message-ID: <1993Jan4.053012.23019@coe.montana.edu> For those of you who have been long-term CP/Mer's, a few questions about CP/M: Is CP/M in the public domain now? Does DRI still own it? If not, is anyone still actively developing it (CP/M) or still developing applications for it? My reason for asking is this: I'm working on some software (a subset Fortran-90 compiler) that will run using a pcode-interpreter program. I'm wondering if it'd make sense for me to eventually port a version of it to CP/M. Just curious... The first micro I ever used was an Apple-2, c. 1979. We'd look at that machine (w/ 48K of RAM) and think, "Gee, who could ever *really* use that much memory!!!" :-) Often I get the sense that despite all the hardware advances of the last 15 years (many), and despite the software advances (few), the things ordinary people really *use* and *need* computers for, really haven't changed all that much. I read & hear regularly how GUI's make people more 'productive' (whatever *that* means), and trade rags commonly try to sell me the idea that I need a 15 ziloMIP box on my desk with enough RAM on board to sink the Titanic... Is there still a market for CP/M machines and software? Has MS-DOS (+MS Windows, +IBM OS/2, + ??) made CP/M obsolete? Or just raised everyone's expectations so much that CP/M couldn't compete? (You know, the line that you'll just DIE if you don't get 256-color VGA with razzle-dazzle mouse-button thingumbobs with your checkbook balancing program...) Ciao -- Lou. -- Lou Glassy (uesu03@giac1.oscs.montana.edu) Eccl. 9:10 ------------------------------ Date: 4 Jan 93 05:11:34 GMT From: agate!spool.mu.edu!news.cs.indiana.edu!babbage.ece.uc.edu!uceng.uc.edu!schriste@ucbvax.Berkeley.EDU (Steven Christensen) Subject: Wither S-100 HD controllers? Message-ID: Hi All... Tonight I finally rolled up my sleaves and looked through the 8" disks I got with my CCS S-100 CP/M system. I found copies of BIOS code that the previous owner had modified to fix some bugs in the CCS BIOS. Anyway, I was thinking ... Gee, it sure would be nice to have a hard drive with my system (especially since I am thinking about getting ZCPR running). Does anyone know where I can get a hard drive controller for the S-100 bus? Do they take some kind of industry standard HD? (I heard MFM...). On a side note, has anyone configured ZCPR with a CCS floppy card and CPU? I think there are some BIOS mods needed, and would sure appreciate someones experience. Also, I have a couple of H-19 terminals that are taking up space. How much could I expect to get for these (they both work great). Thanks for your patience. Some of you "old time" CP/M-ers are probably chuckling, remembering back when you first modified your BIOS. It's funny - at work we work on state-of-the art DSP processors on the latest DEC Vaxes--- yet there is some simple attraction to the S-100 bus and CP/M. Probably has to do with the fact that I am impressed what can be done in less than 64K... Any conversation would be helpful... Steven -- Steven V. Christensen schriste@uceng.uc.edu ------------------------------ Date: 31 Dec 1992 23:01:10 -0500 (CDT) From: Arun Baheti Subject: Xerox System+Printer For Sale (in LA) > FOR SALE: XEROX 16/8 and DIABLO 630 > > Hardware: > 10 Meg. hard drive > 8" DD/DS floppy > one extra hard drive and one extra floppy unit > Low Profile Extended Keyboard > Mouse > Serial Interface Unit (SIU/Ethernet connector) > Inmac Glare Sentry II (save what's left of your eyes) > 40 CPS Daisy Wheel printer (Diablo 630) > All relevant technical manuals > > Software: > CP/M-80 > CP/M-86 > MS-DOS > WordStar 3.3 > Xerox WordStar > Microsoft Basic > Supercalc 2 > The Boss Financial System > dBase-II > dGraph & RunTime & Zip > Business Graphics > Analyst > UCSD p-System Pascal > 40 disks of public domain software > including installed communications and ZCPR3 Make me an offer I can't refuse... ------------------------------ End of INFO-CPM Digest V93 Issue #1 *********************************** 5-Jan-93 12:50:05-MST,8929;000000000000 Return-Path: Date: Tue, 5 Jan 93 12:45:30 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #2 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930105124530.V93N2@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Tue, 5 Jan 93 Volume 93 : Issue 2 Today's Topics: Can Kaypro's be made to read MSDOS floppies? Cp/m laptop for sale. Osborne floppy conversion.... Re: Can Kaypro's be made to read MSDOS floppies? Re: Osborne1 disk translation help (2 msgs) S-100 Boat Anchor for sale Shugart 8" 800/801 jumper settings ?? Where does this INFO-CPM digest exist? Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 5 Jan 93 15:58:32 GMT From: agate!spool.mu.edu!mixcom.com!Rick.Bronson@ucbvax.Berkeley.EDU (Rick.Bronson) Subject: Can Kaypro's be made to read MSDOS floppies? Message-ID: <1993Jan05.155832.15171@mixcom.com> Hello, Is there a program for Kaypro II so that it can read MS-DOS floppies? Also - what is a good modem program that will run at least a 1200 baud modem on a Kaypro II? Thanks Rick -- .------------------------------------------------. | Rick Bronson Tel 414-362-2419 | | Marquette Electronics Inc. FAX 414-362-3010 | | 8200 W. Tower Ave. "My empolyer never | | Milwaukee, WI 53223 agrees with me" | | Internet: rick@mei.com | | uunet or weekends: rick.bronson@mixcom.com | `------------------------------------------------' ------------------------------ Date: 4 Jan 93 21:26:36 GMT From: misty!misty.sara.fl.us@uunet.uu.net (Dave Goodman) Subject: Cp/m laptop for sale. Message-ID: <910@misty.sara.fl.us> For Sale: NEC PC-8500 CP/M laptop computer. 80 x 25 LCD screen, Cp/m 2.2 in ROM. Powered by battery (C cells) or AC (adapter included). Serial and parallel ports. The following software is in ROM: WordStar Calc (spreadsheet) Communications Personal Filer (a small personal database) The unit contains a built-in 300 baud modem (whee!) but the included communications program can also drive the serial port at up to 9600 baud. Also included are two 128k PC-8508A ram cartridges, and all manuals, in original packing material. Asking $175. -- Dave Goodman daveg@misty.sara.fl.us ...uunet!misty!daveg ------------------------------ Date: Mon, 4 Jan 93 22:24:24 EST From: eudoh@st6000.sct.edu (Etop Udoh) Subject: Osborne floppy conversion.... Message-ID: <9301050324.AA27270@st6000.sct.edu> hi, I have a tandy 4P with CP/M software which allows me to read numberous CP/M formats with Osborne being one of them....and I've read Osborne disks before - about 6 years ago.... but anyway, I'm in your area I believe or somewhere near you and wouldn't mind doing the conversion for you.... -- ....................................................................... : Etop Udoh Southern College of Technology : : 3210 Hudson Rd. internet: Eudoh@sct.edu : : Marietta, Ga 30060 UUCP: Ninja@willard.waffle.atl.ga.us : : voice mail: 404-424-8858 : : Abandon all hope ye who have entered " CYBERSPACE " : :.....................................................................: ------------------------------ Date: 5 Jan 93 16:40:45 GMT From: agate!dog.ee.lbl.gov!hellgate.utah.edu!cc.usu.edu!ivie@ucbvax.Berkeley.EDU (CP/M lives!) Subject: Re: Can Kaypro's be made to read MSDOS floppies? Message-ID: <1993Jan5.104046.62462@cc.usu.edu> In article <1993Jan05.155832.15171@mixcom.com>, Rick.Bronson writes: > Is there a program for Kaypro II so that it can read MS-DOS > floppies? Yes. MicroSolutions has (or at least used to have) a Kaypro version. I've got it on my Kaypro 10 and it works fine. -- Roger Ivie "My God! That computer is full of Pentium! ivie@cc.usu.edu It's a wonder that you haven't been turned into mutants!" ------------------------------ Date: 4 Jan 93 09:17:22 GMT From: agate!spool.mu.edu!yale.edu!ira.uka.de!news.belwue.de!ifi!news@ucbvax.Berkeley.EDU (Weber) Subject: Re: Osborne1 disk translation help Message-ID: <1993Jan4.091722.25611@ifi.informatik.uni-stuttgart.de> In article <1465.544.uupcb@ehbbs.gwinnett.com> curt.tucker@ehbbs.gwinnett.com (Curt Tucker) writes: > >I'm trying to get some advice on how to translate some old SSSD >5.25" Osborne1 CPM disks to MS-DOS readable ones. > If the Osborne is still alive you can format double densitiy discs, too and copy the single densitiy discs to the double density discs. Osborne DD discs can be read by a PC (e.g. with ZSIM20). -- Juergen G. Weber Student am Institut fuer Informatik University of Stuttgart - Germany ------------------------------ Date: 5 Jan 93 00:35:06 GMT From: psinntp!sugar!tghost!f-454!Usenet@uunet.uu.net (Charles Cotham) Subject: Re: Osborne1 disk translation help Message-ID: <726212747.AA00475@f-454.fidonet.org> Curt, leave me a phone number and I will try to get intouch with you, I can translate the sssd to ssdd or even IBM format with my osborne 1. Charles Cotham 2205 Lilac St. Nederland, Tx 77627 409-727-6156 ------------------------------ Date: 5 Jan 93 13:29:53 GMT From: paladin.american.edu!howland.reston.ans.net!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!udecc.engr.udayton.edu!blackbird.afit.af.mil!ss1!serkowtk@gatech.edu (Tom K. Serkowski) Subject: S-100 Boat Anchor for sale Message-ID: <1993Jan5.132953.9286@afit.af.mil> I stopped using this computer about 4 years ago & haven't turned it on since, so not sure if it works. I almost threw it in the trash when I moved to Ohio, but decided there may still be someone out there who wants it. The minimum bid is cost of shipping. If I get any offers, the highest bidder will get it on 1/31/93. XOR 12 slot enclosure 12 amp @ +8v 6 amp @ +- 16v 4 floppies 2 SSDD 8" drives, several boxes of disks/software Compupro: DISK 1 Interfacer 4 CPU-Z 6mhz 64k static RAM Visual 200 terminal Tom Serkowski tks@cw3.sews.wpafb.af.mil or tks@cray.com Dayton, OH (513)426-4964 (home) (513)252-2457 (work) ------------------------------ Date: 5 Jan 93 13:45:38 GMT From: pipex!bnr.co.uk!uknet!mcsun!news.funet.fi!news.lut.fi!messmer@uunet.uu.net (Willi Messmer) Subject: Shugart 8" 800/801 jumper settings ?? Message-ID: I've three different controller types, each with different board layout. Two with 40pin cntrlchip, one without (punch of TTLs & others) I'd need to know the purpose of different jumpersetting on these controllers, and how to chain correctly two diff. controllers ??? Thanks, Willi messmer@lut.fi ------------------------------ Date: 4 Jan 93 18:58:07 GMT From: panther!mothost!lmpsbbs!lanceh@uunet.uu.net (Lance Hall) Subject: Where does this INFO-CPM digest exist? Message-ID: <1993Jan4.185807.9766@lmpsbbs.comm.mot.com> The subject is the real question... I have seen responses to comp.os.cpm articles referencing the INFO-CPM digest but have never seen the real digest articles themselves. Clues anyone??? -- = Lance N. Hall = +1 708 576 2378 (Client) lanceh@comm.mot.com = +1 708 505 9100 x387 (Employer) lanceha@isc.com = +1 708 213 8833 (Home) ------------------------------ End of INFO-CPM Digest V93 Issue #2 *********************************** 6-Jan-93 16:16:59-MST,10710;000000000000 Return-Path: Date: Wed, 6 Jan 93 16:16:05 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #3 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930106161605.V93N3@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Wed, 6 Jan 93 Volume 93 : Issue 3 Today's Topics: diseased Kaypro/Wordstar Infocom Kaypro 2x for sale Re: Can Kaypro's be made to read MSDOS floppies? (2 msgs) Re: Infocom Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 6 Jan 93 18:02:55 GMT From: swrinde!emory!cs.utk.edu!jfarmer@gatech.edu (JOHN FARMER) Subject: diseased Kaypro/Wordstar Message-ID: <1if6sfINNeou@CS.UTK.EDU> I have a Kaypro 4'84, and I'm using Wordstar 4.0, and I have a problem somewhere. I keep looking part of 'large-files'. What's happening is that parts of files are disappearing only to be replaced with other (duplicate) parts of the same file. The first times it happened, I was working on a large file on a full disk, and I just assumed that when I had tried to save, and there wasn't room, that Wordstar got lost when it stopped to tell me there wasn't any room and I had to delete stuff to continue. The latest time it happened, I was working on a much smaller file on a virtually empty disk. (and to make it worse, I was dutifully saving every so often, so there was no backup file to get the data from. I lost about 2-3 hours of work.) My husband thinks it's a disk drive problem. I'm not so sure. I don't seem to have the problem with pip, for instance. Any suggestions? Ideas? I do re-build Wordstar ever so often. I use it all the time, and the disk "goes bad" every so often. All help appreciated. Thanks Susan -- Susan B. Farmer farmer@cs.utk.edu Lady Jerusha Kilgore I can't even find time to clean house and you want me to come up with a .sig? And now she wants to go back to grad school after 14 years ..... We'll let her out when the delusion passes. ------------------------------ Date: 6 Jan 93 18:00:31 GMT From: destroyer!caen!sdd.hp.com!zaphod.mps.ohio-state.edu!darwin.sura.net!cs.utk.edu!jfarmer@gatech.edu (JOHN FARMER) Subject: Infocom Message-ID: <1if6nvINNemc@CS.UTK.EDU> Some time ago I read in rec.arts.int-fiction about Infocom, but unfortunately I don't remember much of it. I know that Infocom was bought out and then shut down. What is the legal status of Infocom games? When (if ever) will they be available via public domain sources? Are there still sources for purchasing them? Thanks. Susan -- Susan B. Farmer farmer@cs.utk.edu Lady Jerusha Kilgore I can't even find time to clean house and you want me to come up with a .sig? And now she wants to go back to grad school after 14 years ..... We'll let her out when the delusion passes. ------------------------------ Date: 6 Jan 93 21:51:58 GMT From: darwin.sura.net!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!csn!teal.csn.org!alexm@gatech.edu (Alex Matthews) Subject: Kaypro 2x for sale Message-ID: For sale: ** Kaypro 2x ('84) ** - CP/M - 64k RAM - two 190k 5.25" floppy drives Includes: - Brother HR-5 dot-matrix printer (normal/thermal transfer) - Kaypro LQ daisywheel printer w/fonts (Courier 10, Herald Elite 10/12, Caroll OCR12, Standard PS) and tractor and bin sheetfeeder attachments - software: Wordstar, Checks&Balances, Basic, C, Fortran, Uniform (reads DOS floppies), dBaseII - complete manuals This system is great for basic, high-quality word processing. The daisywheel printer is really a Juki clone of a Diablo (1600, I think). I'm in Boulder, CO. Send me email if you're interested, and make me an offer. -- - Alex Matthews (new address: alexm.csn.org) "A typical Grand Prix race. High noon. Tension mounts. Throttles clench." Patricia Zonker, _Murdercycles_ ------------------------------ Date: 6 Jan 93 08:03:35 GMT From: newsflash.concordia.ca!mizar.cc.umanitoba.ca!shad04@uunet.uu.net (Dan Fandrich) Subject: Re: Can Kaypro's be made to read MSDOS floppies? Message-ID: In article <1993Jan05.155832.15171@mixcom.com> Rick.Bronson@mixcom.mixcom.com (Rick.Bronson) writes: >Hello, > Is there a program for Kaypro II so that it can read MS-DOS >floppies? Also - what is a good modem program that will run >at least a 1200 baud modem on a Kaypro II? According to my list, SIMTEL-20 has these files available via anonymous ftp (I don't have a Kaypro, so I can't vouch for them): DSKUTL:RDMS233.LBR 39808 8605 Reads/copies files from MSDOS disks DSKUTL:RDMSDOS.LBR 10752 8604 Read/write MSDOS disks on CP/M sys. DSKUTL:READ-PC.LBR 11392 8707 Read MS/PCDOS disks on CP/M DSKUTL:TRANSF12.LBR 79872 8612 Transfer files to/from MS/DOS disks FILCPY:MSWEEP.LBR 28544 8604 Copy files to/from 8'' CP/M & MSDOS KAYPRO:TRANSKP4.LBR 41472 8607 Transfer files between CP/M & MS-DOS >>> Dan -- Internet: shad04@ccu.umanitoba.ca Compu$erve: 72365,306 ------------------------------ Date: 6 Jan 93 21:29:00 GMT From: nevada.edu!news.unomaha.edu!cwis.unomaha.edu!haworth@uunet.uu.net (Dwight A. Haworth) Subject: Re: Can Kaypro's be made to read MSDOS floppies? Message-ID: <1993Jan6.212900.21766@news.unomaha.edu> Rick.Bronson@mixcom.mixcom.com writes: > Hello, > Is there a program for Kaypro II so that it can read MS-DOS > floppies? Also - what is a good modem program that will run > at least a 1200 baud modem on a Kaypro II? > Thanks > Rick The answer to your read MS-DOS problem depends on the kind of drives you have in your Kaypro II. If you have double-sided double density drives, you should be able to use some of the public domain or commercial software that is available. If you have single-sided drives, you may be out of luck. I use Compat in my 4/84 with no problems. Dwight Haworth haworth@cwis.unomaha.edu ------------------------------ Date: 6 Jan 93 19:16:09 GMT From: agate!spool.mu.edu!caen!zaphod.mps.ohio-state.edu!rpi!newsserver.pixel.kodak.com!gbr@ucbvax.Berkeley.EDU (Bruce Rodgers) Subject: Re: Infocom Message-ID: <1993Jan6.191609.23190@pixel.kodak.com> In article <1if6nvINNemc@CS.UTK.EDU> jfarmer@cs.utk.edu (JOHN FARMER) writes: > >Some time ago I read in rec.arts.int-fiction about Infocom, but unfortunately >I don't remember much of it. I know that Infocom was bought out and then >shut down. What is the legal status of Infocom games? When (if ever) >will they be available via public domain sources? Are there still sources >for purchasing them? Thanks. > >Susan > >-- >Susan B. Farmer farmer@cs.utk.edu Lady Jerusha Kilgore >I can't even find time to clean house and you want me to come up with a .sig? > And now she wants to go back to grad school after 14 years ..... > We'll let her out when the delusion passes. Mediagenic has re-released a package of 20 Infocom games, under the package name of "The Lost Treasures of Infocom". It is available at most computer stores for about $50-$60. I got mine at Electronics Boutique over a year ago for $53.99. At that time, only the IBM-PC version was available. I assume that the Mac version is now available. There was a duplication problem in one of the 3.5 in. diskettes, long since fixed. The props/documentation are all presented in a bound softcover book (except for the complete maps of the games), as well as a hint book. There is a (rather kludgey, IMHO) installation front end that was added on (by virtual "volunteers", from what I heard about the time and money they were given ;-). While the props and original boxes are not there (and thus taking a bit out of the self-imposed "fun"), the games are all there and intact. It was great to travel down memory lane. From an old post by Chuck Greenwald, Sept '91: ----------------------------------------------------------------- ... The twenty games are: MYSTERY SCIENCE FICTION Deadline Starcross Witness Suspended Suspect Planetfall Ballyhoo Stationfall Moonmist Hitchhikers Guide to the Galaxy ZORK MYSTICAL Zork Zero Enchanter Zork I Sorcerer Zork II Spellbreaker Zork III Beyond Zork HORROR ADVENTURE Lurking Horror Infidel This is all of the Infocom games through 1986, except Cutthroats, Seastalker, Fooblitzky, AMFV, Wishbringer, Hollywood Hijinx, Trinity, and Leather Goddessses. It also includes one each from 1987 and '88. There are still some copies of Leather Goddesses in stores. I guess the other 8 were not very popular. ... and Hollywood Hijinx is one of my favorites! ------------------------------------------------------------------------- Chuck Greenwald | chuckg@meaddata.com Mead Data Central | (513) 865-1020 ----------------------------------------------------------------- And hey, $50 for *20* Infocom games - can't beat it with a coupon!! Cheers, Bruce rodgers@kodak.com ------------------------------ End of INFO-CPM Digest V93 Issue #3 *********************************** 7-Jan-93 17:17:54-MST,11027;000000000000 Return-Path: Date: Thu, 7 Jan 93 17:15:12 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #4 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930107171512.V93N4@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Thu, 7 Jan 93 Volume 93 : Issue 4 Today's Topics: .lbr???? Anyone? Morrow MD-11 woes Re: Can Kaypro's be made to read MSDOS floppies? Re: diseased Kaypro/Wordstar Re: Infocom (2 msgs) Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 7 Jan 93 22:01:14 GMT From: enterpoop.mit.edu!eru.mt.luth.se!lunic!sunic!dkuug!daimi!u920659@ucbvax.Berkeley.EDU (Carsten S|rensen) Subject: .lbr???? Anyone? Message-ID: <1993Jan7.220114.2364@daimi.aau.dk> As I'm a complete newbie in cp/m ... I'd like to know what the extension .lbr is? I guess it's some kind of archive but I haven't had the luck to find an unarchiverfor it. Where can I get it (ftp)? And which sites have a lot of cp/m stuff? Thanks in advance /Carsten u920659@daimi.aau.dk -- SLAMMER of //\ __ __ __ _ |_ //--\| )(_| | (__| )\/ - BEDTIME FOR DEMOCRACY e-mail: u920659@daimi.aau.dk / Opinions? What opinions? ------------------------------ Date: 7 Jan 93 04:48:43 GMT From: agate!spool.mu.edu!caen!nic.umass.edu!titan.ucc.umass.edu!not-for-mail@ucbvax.Berkeley.EDU (Michael Morgan) Subject: Morrow MD-11 woes Message-ID: <1igcnbINNpi8@titan.ucc.umass.edu> Hi old-time CP/M'ers! I try to rarely spend time on Usenet (too much else to do, and Usenet can be too addictive), but it's nice to see a CP/M group here! Anyway, I used to use a Morrow MD-11 (at the time of purchase, circa 1984, it was far more powerful than just about anything else out there); I haven't used or needed it for some years, but I've recently wanted to pull some old files off of it (most of them in LBR format). Trouble is, the old thing just won't boot. I get a "Data Not Found" error regardless of whether I try to boot off the hard disk or an original distribution floppy. Unfortunately, I put all the manuals I had out in the recycling bin some months ago, so I can't just look up the answer to my dilemma. In any case, does anyone have any suggestions? Does anyone know which jumpers to change to conduct diagnostics on this lovely dinosaur? Or, if the problem is the disk controller (which seems likely), does anyone have any suggestions whatsoever as to how it might possibly be fixed? I'll try to check this newsgroup, but private responses would be especially appreciated. Thanks in advance, and cheers to those keeping the CP/M flame, Michael *-----------------------------------------------------------------* | Michael Morgan * /\/\ /\/\ * mmorgan@comm.umass.edu | | Department of Communication, UMass/Amherst, MA 01003 USA | | Phone (413) 545-xxxx // Dept: 1311 // Office: 6345 // Fax: 6399 | *-----------------------------------------------------------------* ------------------------------ Date: 7 Jan 93 02:57:28 GMT From: saimiri.primate.wisc.edu!caen!nic.umass.edu!m2c!jjmhome!schunix!rwyble@ames.arc.nasa.gov (Richard J. Wyble) Subject: Re: Can Kaypro's be made to read MSDOS floppies? Message-ID: <1993Jan7.025728.28872@schunix.uucp> haworth@cwis.unomaha.edu (Dwight A. Haworth) writes: : Rick.Bronson@mixcom.mixcom.com writes: : > Hello, : > Is there a program for Kaypro II so that it can read MS-DOS : > floppies? Also - what is a good modem program that will run : > at least a 1200 baud modem on a Kaypro II? : > Thanks : > Rick : : The answer to your read MS-DOS problem depends on the kind of drives you : have in your Kaypro II. If you have double-sided double density drives, : you should be able to use some of the public domain or commercial software : that is available. If you have single-sided drives, you may be out of : luck. I use Compat in my 4/84 with no problems. : : Dwight Haworth : haworth@cwis.unomaha.edu : There is a commercial package called Uniform -- been around for years, should still be in business. If you can't find it, ask and I'll look up the manual. Be sure that you don't pick up a second-hand copy for a different Kaypro, e.g., K10, as there are different versions of Uniform for them. -- ---------------------------------------------------------------------- rwyble@schunix.uucp Richard J. Wyble schunix!rwyble@transfer.stratus.com Worcester, Massachusetts ---------------------------------------------------------------------- ------------------------------ Date: 7 Jan 93 03:01:26 GMT From: saimiri.primate.wisc.edu!caen!nic.umass.edu!m2c!jjmhome!schunix!rwyble@ames.arc.nasa.gov (Richard J. Wyble) Subject: Re: diseased Kaypro/Wordstar Message-ID: <1993Jan7.030126.28936@schunix.uucp> jfarmer@cs.utk.edu (JOHN FARMER) writes: : : My husband thinks it's a disk drive problem. I'm not so sure. I don't : seem to have the problem with pip, for instance. Any suggestions? Ideas? : I do re-build Wordstar ever so often. I use it all the time, and the disk : "goes bad" every so often. : Hmn. It's been *many* moons since I used WS4 on a CP/M Kaypro. But I *did* use it, and I recall numerous strange quirks. The code simply did not seem to be mature in the manner of WS3.x. Though I did not experience what you describe, the red flag above is that "the disk "goes bad" every so often." This simply does not happen unless there are problems. Suggestion: start over with a fresh working disk and see what happens. -- ---------------------------------------------------------------------- rwyble@schunix.uucp Richard J. Wyble schunix!rwyble@transfer.stratus.com Worcester, Massachusetts ---------------------------------------------------------------------- ------------------------------ Date: 7 Jan 93 06:19:19 GMT From: agate!spool.mu.edu!wupost!howland.reston.ans.net!sol.ctr.columbia.edu!news.unomaha.edu!cwis.unomaha.edu!haworth@ucbvax.Berkeley.EDU (Dwight A. Haworth) Subject: Re: Infocom Message-ID: <1993Jan7.061919.4149@news.unomaha.edu> Just found a set of 20 of Infocom's games in MS-DOS form for sale at my local Wal-Mart. Cost less than $40 for the set. Clearly they are still owned and sold. Dwight Haworth | "... I arrive at the conclusion that however haworth@cwis.unomaha.edu | a systems problem is solved -- the solution | is wrong, even dangerously wrong." | C. West Churchman -- Dwight Haworth | "... I arrive at the conclusion that however haworth@cwis.unomaha.edu | a systems problem is solved -- the solution | is wrong, even dangerously wrong." | C. West Churchman ------------------------------ Date: 7 Jan 93 14:56:00 GMT From: psinntp!dg-rtp!webo!dg-webo!pds@uunet.uu.net (Paul D. Smith) Subject: Re: Infocom Message-ID: [] Regarding Infocom; [] jfarmer@cs.utk.edu (JOHN FARMER) writes: jf> Some time ago I read in rec.arts.int-fiction about Infocom, jf> but unfortunately I don't remember much of it. I know that jf> Infocom was bought out and then shut down. What is the legal jf> status of Infocom games? When (if ever) will they be jf> available via public domain sources? Are there still sources jf> for purchasing them? Thanks. FYI, rec.games.int-fiction is the proper place for questions like this: rec.arts.int-fiction is for discussion of the art of writing interactive fiction. Followups are directed appropriately :) Copyrights on Infocom games are still held. You cannot get them in the public domain and I don't expect that to change in the near future. The sources are even less available (you can't even illegally copy them from your friends ;). Mediagenic has released both "Lost Treasures of Infocom", with 20 Infocom games, for IBM PC-compatibles, Macintoshes, and Amiga systems. Maps for each game are included, and a book containing photocopies of (almost) all the relevant bits from the packages, and another booklet containing the complete hints for each game. The hints booklet is *very* poorly done, with spelling and formatting errors abounding. But I never use hints so I don't care :) "Lost Treasures of Infocom II", with 11 more games, has been released for IBM PC-compatibles and Macintoshes. This is much more professionally-done package (I guess the success of LTOI I prompted them to put a little more work into LTOI II :), but it doesn't contain any hints, just maps and a book of package materials. It also contains a card where you can order "Leather Goddesses of Phobos" for $9.95+S&H (IBM PC version only). This means all except 4 (I think) Infocom games are currently available. I will be re-posting my Infocom game data table to rec.games.int-fiction momentarily; it has much of the same info as is contained in Paul David Doherty's fact sheet posted here recently, but in a more compact, table form. Email me if you want a copy via email. -- paul ----- ------------------------------------------------------------------ | Paul D. Smith | paul_smith@dg.com | | Data General Corp. | pds@lemming.webo.dg.com | | Network Systems Development Division | | | Open Network Systems Development | "Pretty Damn S..." | ------------------------------------------------------------------ ------------------------------ End of INFO-CPM Digest V93 Issue #4 *********************************** 8-Jan-93 20:48:45-MST,9819;000000000000 Return-Path: Date: Fri, 8 Jan 93 20:45:05 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #5 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930108204505.V93N5@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Fri, 8 Jan 93 Volume 93 : Issue 5 Today's Topics: Attn: California Computer Systems / ZCPR3 Kaypro Machines and Parts Misc CP/M and S-100 questions, if you please. Need XMODEM/Kermit for Osborne/1 ? Re: Misc CP/M and S-100 questions, if you please. (3 msgs) Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 8 Jan 93 07:37:22 GMT From: agate!spool.mu.edu!uwm.edu!cs.utexas.edu!swrinde!emory!sol.ctr.columbia.edu!usenet.ucs.indiana.edu!news.cs.indiana.edu!babbage.ece.uc.edu!uceng.uc.edu!schriste@ucbvax.Berkeley.EDU (Steven Christensen) Subject: Attn: California Computer Systems / ZCPR3 Message-ID: Hi, I have a CCS system with the CCS CPU and the CCS FDC. I want to put ZCPR3 on it, but am having problems modifying my BIOS to do the necessary initialization. The documentation mentions that I may get some help from others who have put ZCPR3 on their CCS systems. So, I am wondering if anyone has ZCPR3 on their CCS systems, and could maybe help me out. I think all I need to have is the CCBIOS.ASM file, appropriately modified for ZCPR3. Can anyone help me? Intrigued by CP/M & S-100, Steven Christensen -- Steven V. Christensen schriste@uceng.uc.edu ------------------------------ Date: Fri, 8 Jan 93 12:43:48 -0500 From: Jay Sage Subject: Kaypro Machines and Parts Message-ID: <9301081243.AA06834@LL.MIT.EDU> I have tried to respond directly to "godel!oscsf@news.pgh.wec.com", who posted a message that appeared in the INFO-CPM digest asking about acquiring a Kaypro II computer. My messages keep bouncing. Could you please send me direct email (SAGE@LL.MIT.EDU). For others reading this, I still have lots of Kaypro parts available. I stripped down two machines so far. I've got power supplies, video supplies, motherboards, and keyboards. There are more machines that can be stripped down as well. I would like to reclaim the room in my basement that is serving as a Kaypro warehouse and also get this equipment into the hands of people who can put it to use. Quite a number of people responded to my earlier posting. It took me a while to find the time to strip the machines down and get messages back to them. Everyone should have heard from me. If you haven't, please send me mail. I would especially like to hear from the person who wanted the K10 hard disk, which is ready to be shipped. -- Jay Sage ------------------------------ Date: 8 Jan 93 07:43:28 GMT From: agate!spool.mu.edu!sol.ctr.columbia.edu!usenet.ucs.indiana.edu!news.cs.indiana.edu!babbage.ece.uc.edu!uceng.uc.edu!schriste@ucbvax.Berkeley.EDU (Steven Christensen) Subject: Misc CP/M and S-100 questions, if you please. Message-ID: Hi, I have some CP/M and S-100 questions, so I thought I'd make one post with many questions. I'd appreciate if anyone who knows the answers could send me mail. 1. Re: Warm Booting. I know some programs expect that the OS will be "warm booted" when they end. Does that mean I have to keep my system disk in drive A:? 2. Can I ever copy a file from a second disk to a third disk by starting PIP and then removing my system disk and putting on the two disks in A: and B:? I've tried this and my system locks up. I can PIP from B: to my system disk in A: and vice versa. I would really like it if I didn't have to keep the CP/M disk in A: 3. I recently got some space S-100 cards. I would like to hear from anybody who has the same hardware for some interface questions. a. HDC-2001 Hard Disk Interface from Advanced Digital Corp - what kind of HD's will this work with? Can anybody share BIOS modifications, maybe for a CCS system? b. Advanced Digital "Super SIX" single board S-100 computer. Any comments? c. A 48 TPI 5 1/4" disk - has anyone interfaced one with a CCS FDC? Thanks for your help (in advance), Steven Christensen -- Steven V. Christensen schriste@uceng.uc.edu ------------------------------ Date: 7 Jan 93 16:53:14 GMT From: pa.dec.com!engage.pko.dec.com!nntpd.lkg.dec.com!sousa.tay.dec.com!msdsws.enet.dec.com!secrist@decuac.dec.com (Strong datatypes for weak minds.) Subject: Need XMODEM/Kermit for Osborne/1 ? Message-ID: <2369@sousa.tay.dec.com> Anybody know where I can get ASM source for XMODEM or Kermit for an Osborne/1 ? Regards, rcs ------------------------------ Date: 8 Jan 93 14:06:30 GMT From: agate!spool.mu.edu!caen!nic.umass.edu!m2c!jjmhome!schunix!rwyble@ucbvax.Berkeley.EDU (Richard J. Wyble) Subject: Re: Misc CP/M and S-100 questions, if you please. Message-ID: <1993Jan8.140630.8897@schunix.uucp> schriste@uceng.uc.edu (Steven Christensen) writes: : : 1. Re: Warm Booting. I know some programs expect that the OS will : be "warm booted" when they end. Does that mean I have to keep : my system disk in drive A:? : : 2. Can I ever copy a file from a second disk to a third disk by starting : . . . . . : it if I didn't have to keep the CP/M disk in A: : Yes, CP/M wants to warm-boot to its A: drive. The easy solution is for you to make *all* of your discs bootable. The system tracks are reserved for this pupose, so doing so will not take up extra disc capacity, as in DOS. They, any disc will do! -- ---------------------------------------------------------------------- rwyble@schunix.uucp Richard J. Wyble schunix!rwyble@transfer.stratus.com Worcester, Massachusetts ---------------------------------------------------------------------- ------------------------------ Date: 9 Jan 93 02:02:27 GMT From: world!bmarcum@uunet.uu.net (Bill Marcum) Subject: Re: Misc CP/M and S-100 questions, if you please. Message-ID: You don't have to keep the system disk in A:. You just need a bootable disk with a copy of PIP or similar utility (such as NSWP or COPY; I get most of my programs from GEnie, but you can probably ftp them from simtel20.wsmr.army.mil). On most CP/M systems you make a boot disk by running SYSGEN. Bill Marcum bmarcum@world.std.com ------------------------------ Date: 8 Jan 93 18:49:00 GMT From: olivea!pagesat!spssig.spss.com!uchinews!lucpum.it.luc.edu!rdth2.rdth.luc.edu!pbricker@ames.arc.nasa.gov (Preston Bricker) Subject: Re: Misc CP/M and S-100 questions, if you please. Message-ID: <8JAN199312492462@rdth2.rdth.luc.edu> In article , schriste@uceng.uc.edu (Steven Christensen) writes... >Hi, > I have some CP/M and S-100 questions, so I thought I'd make >one post with many questions. I'd appreciate if anyone who knows the >answers could send me mail. > >1. Re: Warm Booting. I know some programs expect that the OS will > be "warm booted" when they end. Does that mean I have to keep > my system disk in drive A:? > Yes, you must keep a boot disk in the A: drive. If you boot off a hard drive that's not a problem. Another alternative I've used is to install a RAM disk, SYSGEN the RAM disk and then overlay the BIOS so the RAM disk becomes drive A:. You should also extend the device select jumpers of the floppy drive out to the back so you can change it from A to C, or just hang a third floppy drive on your system. >2. Can I ever copy a file from a second disk to a third disk by starting > PIP and then removing my system disk and putting on the two disks > in A: and B:? I've tried this and my system locks up. I can PIP > from B: to my system disk in A: and vice versa. I would really like > it if I didn't have to keep the CP/M disk in A: > PIP is not smart enough to allow swapping diskettes. Use SWEEP or NSWEEP instead. >3. I recently got some space S-100 cards. I would like to hear from > anybody who has the same hardware for some interface questions. > > a. HDC-2001 Hard Disk Interface from Advanced Digital Corp - > what kind of HD's will this work with? Can anybody > share BIOS modifications, maybe for a CCS system? > > b. Advanced Digital "Super SIX" single board S-100 computer. > Any comments? > > c. A 48 TPI 5 1/4" disk - has anyone interfaced one with > a CCS FDC? > Sorry, can't help here. I'd love a S-100 hard disk controller myself. Preston Bricker pbricker@rdth2.rdth.luc.edu ------------------------------ End of INFO-CPM Digest V93 Issue #5 *********************************** 11-Jan-93 00:01:32-MST,7267;000000000000 Mail-From: W8SDZ created at 10-Jan-93 23:57:06 Return-Path: Date: Sun, 10 Jan 93 23:57:05 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #6 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930110235705.V93N6@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Sun, 10 Jan 93 Volume 93 : Issue 6 Today's Topics: anyone familiar with micr Anyone familiar with Micro 5 Turbo 1000 system running MP/M ? Re: .lbr???? Anyone? Re: What is the legal status of CP/M? (2 msgs) Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 10 Jan 93 19:40:00 GMT From: uunet.ca!canrem!dosgate!dosgate![mark.wheeler%canrem.com]@uunet.uu.net (mark wheeler) Subject: anyone familiar with micr Message-ID: <199310.4443.3321@dosgate> HC> 2) Will the accounting program run on Dos?... Henry, it's likely that source changes would have to be made. Best way I can think of running this program, since your friend is thinking of porting it to a 386 machine, is to get a copy of Simeon Cran's MYZ80 CP/M emulator for DOS (286 or above) systems. Then just run have your friend continue running it as a CP/M application, but on his DOS machine. It should run faster under CP/M emulation on a 386 than it did on the old machine. -- Canada Remote Systems - Toronto, Ontario World's Largest PCBOARD System - 416-629-7000/629-7044 ------------------------------ Date: 9 Jan 93 17:25:34 GMT From: pa.dec.com!nntpd2.cxo.dec.com!nntpd.lkg.dec.com!ryn.mro4.dec.com!armory.enet.dec.com!chungh@decuac.dec.com (Henry Chung) Subject: Anyone familiar with Micro 5 Turbo 1000 system running MP/M ? Message-ID: <1993Jan9.144150.19232@ryn.mro4.dec.com> Hi, Is anyone familiar with Micro 5 Turbo system ? Does the company still exist today ? Since I am not very CP/M literate, maybe some of you CP/M gurus can help me out. One of my friends' company has a Micro 5 System running an acounting program (written in MBASIC). The system is a multi-user system and has 24 serial ports on the back. Since the system is very old, he is afraid the system may die someday and lose all of his data. He would like to replace the machine with a standard 386 compatiable PC The Questions that I have are: 1) Can I replace the MP/M with another multi-user operating system such as DR. DOS mult-user version or DesQview running on top of regular DOS ? 2) Will the accounting program run on DOS ? (I do have the source code if I need to make minor modification to the program.) Thank you very much. /Henry ------------------------------ Date: 9 Jan 93 22:41:50 GMT From: bobsbox.rent.com!s4mjs!spatula!ahm@rutgers.edu (Andreas Meyer) Subject: Re: .lbr???? Anyone? Message-ID: <1993Jan9.224150.25741@spatula.rent.com> In comp.os.cpm, u920659@daimi.aau.dk (Carsten S|rensen) writes: > As I'm a complete newbie in cp/m ... I'd like to know what the extension > .lbr is? .LBR is a LiBRary file > I guess it's some kind of archive but I haven't had the luck to > find an unarchiver for it. Where can I get it (ftp)? And which sites have > a lot of cp/m stuff? What you need is one of the LU (Library Utility) variants, like LU.COM - I've been using NULU152.COM for quite a while now. Check any of the SIMTEL mirror sites for CP/M software. Cheers, Andy -- Andreas Meyer, N2FYE ahm@spatula.rent.com "Been there. Did that." ------------------------------ Date: 6 Jan 93 01:11:21 GMT From: cs.utexas.edu!milano!cactus.org!wixer!fmouse@uunet.uu.net (Lindsay Haisley) Subject: Re: What is the legal status of CP/M? Message-ID: <1993Jan6.011121.2764@wixer.cactus.org> In article <1993Jan4.053012.23019@coe.montana.edu> uesu03@giac1.oscs.montana.edu (Lou Glassy) writes: >Is CP/M in the public domain now? Does DRI still own it? If >not, is anyone still actively developing it (CP/M) or still >developing applications for it? DRI was recently bought up by Novell, so you might inquire of them regarding proprietary rights, etc. Yes, there are a few folks still actively developing stuff for CP/M, or actually for the upward compatable equivalent of it, ZCPR34 which runs on the same machines. There are a number of BBS's around the world (known as Z-nodes) which feature ZCPR3 software and exchange information with interested users. CP/M has been religated to pretty much of a hobby status, and most of the Z system folks are pretty much like ham radio operators - the do it for fun and are enthusiastic about it. I run a CP/M BBS (Z-node #77) and am still an advocate of CP/M as an educational operating system since it's pretty completely known and quite transparent if you get down to studying it. As one of my CP/M correspondants said, "I studied MS-DOS to learn how applications work - I studied CP/M to learn how computers work". There is even a magazine - The Computer Journal -which devotes considerable space to CP/M and ZCPR3 topics. I suggest you check on to Z-node #3 and explore. The number is 617-965-7259. Jay Sage, the friendly sysop thereof, also owns Sage Microsystems East which markets a number of fine CP/M and ZCPR3 products, some of which Jay has rescued from a one way journey to the ash heap of computer history. I strongly suggest that if you plan to do any software development for CP/M you contact Jay and others in the Z System community and make your product ZCPR3 aware, since the improvements in ZCPR3 over DRI's original CP/M are very signifigant and intelligent. -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ Date: 9 Jan 93 17:59:01 GMT From: asuvax!asuacad!cxkpv@gatech.edu Subject: Re: What is the legal status of CP/M? Message-ID: <93009.105901CXKPV@ASUACAD.BITNET> Does anyone know of any "z-nodes" (or other cpm bbss) in the 602 area code? ------------------------------ End of INFO-CPM Digest V93 Issue #6 *********************************** 11-Jan-93 21:17:49-MST,14102;000000000000 Return-Path: Date: Mon, 11 Jan 93 21:15:33 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #7 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930111211533.V93N7@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Mon, 11 Jan 93 Volume 93 : Issue 7 Today's Topics: Getting Kermit onto Kaypro II RCPM BBS list (11/92) Re: diseased Kaypro/Wordstar Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 11 Jan 93 21:45:45 GMT From: sun-barr!cs.utexas.edu!zaphod.mps.ohio-state.edu!uwm.edu!ogicse!news.u.washington.edu!daffy.cac.washington.edu!harold@ames.arc.nasa.gov (Harold Bobroff) Subject: Getting Kermit onto Kaypro II Message-ID: <1ispq9INNqh7@shelley.u.washington.edu> Greetings CP/M folks. Having bashed my head against this for a while with zero success, I now turn to you net.experts for advice. I'm trying to bootstrap Kermit-80 4.11 (I think - it's the current stuff from Columbia, at any rate) on a Kaypro II running CP/M 2.2 . I've no file-transfer software for this beast at all, just a wretched terminal program called TERM that sort of emulates an ADM 3A. Following the instructions in cpskerm.doc, I carefully typed into DDT the capture program from the kermit distribution(cpkfet.ddt), saved it, logged into the Unix host with the hex files, changing the prompt to '@' as expected by the program, and entered 'cat cpskerm.hex' minus the CR. I then exited TERM program and ran the capture program, but (surprise) nothing happened, nothing at all. No modem activity whatsoever, which would seem to indicate that perhaps the program isn't talking to the right device? But that's just a wild guess, since I'm almost completely CP/M clueless. I believe IOBYTE is ok; at least I didn't consciously do anything to modify it. Alternatively, I could just type in all the .ASM sources and assemble it myself, but ASM is the only assembler I've got, and apparently it won't cut it for building Kermit. No .ASM source for LASM is provided with the Kermit stuff, only a .HEX, and I can't imagine trying to type that in. So, I'm open to any and all suggestions(aside from converting the machine into a doorstop, that is). E-mail would probably be best, but posted replies are fine. Thanks much in advance! Harold harold@u.washington.edu ------------------------------ Date: 10 Jan 93 14:01:09 GMT From: sdd.hp.com!hpscit.sc.hp.com!icon.rose.hp.com!gregh@hplabs.hpl.hp.com (Greg Holdren) Subject: RCPM BBS list (11/92) Message-ID: I have a CPM BBS list maintained by Ian Cottrell dated 11/92. For those of you asking for "where can I get CP/M progs from", well here is a good source by modem. Send Email and I'll send the list. If I get a ton of message then I'll post to the group if no one objects. Greg Holdren (916)785-7481 gregh@hprnd.rose.hp.com gregh@hprnls1c.rose.hp.com ------------------------------ Date: 11 Jan 93 21:30:56 GMT From: news.tek.com!wrgate!fury.wr.tek.com!donk@uunet.uu.net (Donald C. Kirkpatrick) Subject: Re: diseased Kaypro/Wordstar Message-ID: <11122@wrgate.wr.tek.com> In article <1if6sfINNeou@CS.UTK.EDU> jfarmer@cs.utk.edu (JOHN FARMER) writes: > >I have a Kaypro 4'84, and I'm using Wordstar 4.0, and I have a problem >somewhere. I keep looking part of 'large-files'. What's happening is that >parts of files are disappearing only to be replaced with other (duplicate) >parts of the same file. > >The first times it happened, I was working on a large file on a full disk, >and I just assumed that when I had tried to save, and there wasn't room, that >Wordstar got lost when it stopped to tell me there wasn't any room and I had >to delete stuff to continue. The latest time it happened, I was working on >a much smaller file on a virtually empty disk. (and to make it worse, >I was dutifully saving every so often, so there was no backup file to >get the data from. I lost about 2-3 hours of work.) > >My husband thinks it's a disk drive problem. I'm not so sure. I don't >seem to have the problem with pip, for instance. Any suggestions? Ideas? >I do re-build Wordstar ever so often. I use it all the time, and the disk >"goes bad" every so often. > >All help appreciated. > >Thanks >Susan B. Farmer farmer@cs.utk.edu While it is not yet known for sure, the problem described above appears to me as if Susan has found the infamous BDOS Function 37 bug. She is now checking to see if that was indeed her problem. To save others her grief, I thought I'd post the information I sent to her. Everyone who has not yet installed a BDOS replacement must at least become aware of this bug and decide for themselves whether or not to patch their BDOS. The following text is from the file NULU151.INF contained in the library NULU152A.LBR. I have deleted much that is not relevant and you will find my comments in square brackets with my initials. -------------------------begin extraction------------------------------- [Extracted from: NULU152.INF, a file included with NULU152A.LBR, a library utility program - DCK] The other problem - that of overcoming the BDOS error is more complicated. The simplest way would be to fix the BDOS and I have included a patch to the Digital Research BDOS for those who wish to make the change. There are dangers inherent with fixing the BDOS however, and I would strongly recommend leaving things the way they are. My argument for leaving things is as follows: The CP/M 2.2 BDOS is a stable product and can be guaranteed to perform in exactly the same way for every user. Knowing its limitations, it is possible to overcome the problems caused by the bug(s). If all users of NULU were to patch their BDOSes, they may one day come across a program which works BECAUSE of the bug and hence would not work on their systems. Similarly, any software developed on a 'fixed' BDOS cannot be guaranteed to work on an unfixed BDOS. However, I include the patch and leave it up the users to decide. Freedom of choice is everyones right. The BDOS bug although related to function 37 is not, in fact, in that function but in the Select Disk function (function 14). Problems will only be caused under the following circumstances: 1. The default drive has been reset, AND 2. Data has been written to the default drive since the disk reset, AND 3. Some sort of disk activity is requested on a different drive. The BDOS keeps a 16 bit variable (the login vector) which shows the login state for each of drives A-P. In the vector, each bit represents one drive and is set if the drive is logged in. As records are written to disk, the allocation vector in the BIOS is used to maintain a record of those disk blocks allocated to the file. The allocation vector is updated as blocks are written to disk but is initially set up from the disk directory when the drive is first logged in. BDOS function 37 simply resets the appropriate bit(s) in the login vector which should cause the drive to be relogged on the next access. Unfortunately, Digital Research maintain an internal variable for holding the last drive accessed and check it before logging in a disk. If the requested drive is the same as the last, then the BDOS assumes that it is already logged in and it doesn't check the login vector at all. If we have reset the default drive, the internal variable will still say that is is logged in, even though the login vector bit will have been reset. Disk writes may still be made to this drive and the allocation vector will still be updated. If we were now to temporarily switch drives to do a read, for example. The internal variable will reflect this and NEXT time we access the default drive, the BDOS's check will now say "Ah, a different drive - check the login vector". When this happens, of course, it will find the bit for this drive is reset and will re-read the disk directory to update the allocation vector. The disk directory is only updated when either an extent boundary is passed (every 16k) or when the file is closed. Consequently, unless we are lucky, the disk directory will not show the last few disk writes we have made and those bits will be reset in the allocation vector. This means that as far as the BDOS is concerned, those blocks are free for use and it will use them again - even if it means allocating the same block(s) twice to the same file. In context of NULU, assume that a library, resident on drive A, is open and that we are currently logged into drive B (ie: drive B is the default drive). Assume that we wish to extract a 100k member file to drive B. NULU creates a buffer when the library is opened and a 2k buffer for the file to be extracted. The buffer for the library will be a large percentage of the remaining TPA size but suffice to say that it will be smaller than our member file. We then fill the library buffer with the first part of the member file and reset drive B in case the disk has been changed - condition 1 is then satisfied. We now start writing out the member file (condition 2) until the library buffer is exhausted. We then need to read more of the library from drive A - condition 3. On another subject altogether, the additions of code to save and resore the S2 byte are to do with files larger than 512k. It may be of interest to note that Digital Research 'forgot' to document that the S2 byte is an overflow extent byte. Anyone who has tried to edit a text file under Wordstar will probably have found that it goes bananas when the file size exceeds 512k. Wordstar is not alone in this, there are several other commercial and PD programs that suffer badly when dealing with files greater than 512k. Digital Research say that CP/M 2.2 can handle files of up to 8Mb and CP/M Plus can handle files up to 32Mb. They also say that the extent byte (under 2.2 and Plus) can vary between 0 and 31 in use - under CP/M 1.4 this was 0 to 15. Now 32 times 16k is nowhere near 8Mb let alone 32Mb, in fact it comes to that magic figure of 512k - this is where the S2 byte comes in. The S2 byte counts the multiples of 512k used in a file and may range from 0 to 15 under CP/M 2.2 (bits 0-3) and 0 to 63 under CP/M Plus (bits 0-6). Bit 7 of the S2 byte is used by the BDOS as an internal 'archive' bit. When a file is opened, an examination of the S2 byte will show a value of 80H. If any write is performed to the file in question, this bit will be cleared. When the close file function is called, if the bit is set then no action is required. If it is clear, the disk directory is updated. The DRI BDOS fix ---------------- Zero out the following locations in the DRI BDOS, note that the BDOS starts 6 bytes before the address at location 0006H and that ZSID/DDT etc. will not give the true address. Use something like Z3LOC or STATUS to determine your BDOS address. The bytes at those locations and what they do are given so that you can patch away with confidence. Location to patch Byte at that location (Hex) (xx = depends upon BDOS address) BDOS + 0C45H 3A LDA xxD6H ; Get wanted drive BDOS + 0C46H D6 BDOS + 0C47H xx BDOS + 0C48H 21 LXI H,xx42H ; Get last drive BDOS + 0C49H 42 BDOS + 0C4AH xx BDOS + 0C4BH BE CMP M ; Same drive? BDOS + 0C4CH C8 RZ ; Return if it is [Note: only the RZ code at 0c4ch need be set to zero - DCK] This patch prevents the BDOS from using its internal saved record of the last drive accessed and forces it to check the login vector bits to determine whether or not to relog a drive. The patch above works but on your own head be it! -------------------------end of extraction------------------------------ As a final note, anyone who is running one of the BDOS replacements, P2DOS, NovaDOS, ZRDOS, ZSDOS, and so on, should find that this bug has been fixed. I all my 14 years of CP/M, I have never encountered a program that required the bug present to work properly. (Insert weasel words here) Thats not to say such a program doesn't exist, just that I have not found it yet. -- -Don Kirkpatrick (Donald.C.Kirkpatrick@tek.com) UUCP: ...!uunet!tektronix!Donald.C.Kirkpatrick ------------------------------ End of INFO-CPM Digest V93 Issue #7 *********************************** 14-Jan-93 04:18:26-MST,10146;000000000000 Return-Path: Date: Thu, 14 Jan 93 04:15:15 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #8 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930114041515.V93N8@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Thu, 14 Jan 93 Volume 93 : Issue 8 Today's Topics: CP/M FOR TRS-80 MODEL III, 48K Diseased BDOS/Wordstar Fortran for the DEC Rainbow ? Re: .lbr???? Anyone? (2 msgs) re: hard disks for CPM Re: What is the legal status of CP/M? Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 13 Jan 93 23:31:26 GMT From: agate!usenet.ins.cwru.edu!news.uakron.edu!VM1.CC.UAKRON.EDU!R3DRS@ucbvax.Berkeley.EDU Subject: CP/M FOR TRS-80 MODEL III, 48K Message-ID: <16B551047E.R3DRS@VM1.CC.UAKRON.EDU> I have recently aquired a TRS-80 Model III, but with no software (other than a couple bootable TRSDOS V1.2 with nothing else useful on them). Knowing that CP/M was a very popular replacement for TRDOS, i am interested in finding some sort of version of this operating system so i might make some use of this machine. Could someone point me to a source for something i could use? I did find something that looked promising that came with a Z80 emulator for MS DOS, but i think that it might be for a 64K system (mine is 48K). Is there a good CP/M source available through the internet? Also, how about software? Thanks in advance, Dave Snyder r3drs@vm1.cc.uakron.edu ------------------------------ Date: Tue, 12 Jan 93 17:51:14 GMT From: Christopher Currie Subject: Diseased BDOS/Wordstar Message-ID: <4361.9301121751@clus1.ulcc.ac.uk> I was interested in the post about the lodd off data in Wordstar 4.0 and Don Kirkpatrick's post about the BDOS function 37. Some years ago I and otherws were using DEC rainbows with WS 3.00 and found that WS would occasionally lose blocks of text. The files were nowehere near 512 K long. As far as I could discover the text lost was always in a secondary, non-contiguous extent. Recently colleagues have been having a similar problem with WS 4.0 on MS-DOS systems. Text after the first 1K of the file is sometimes lost and the file is cross-linked with another. So far this has only been detected on floppy disk directories, not on hard disks. I know that strictly this is a problem for info-ibmpc, not info-cpm, but it may be that the CP/M and MS-DOS faults are related. I should be grateful for any help that can be offered. Christopher Currie ccurrie@clus1.ulcc.ac.uk ------------------------------ Date: Tue, 12 Jan 1993 08:39 EDT From: Mark Tarka Subject: Fortran for the DEC Rainbow ? Message-ID: <9301120839.TARKA10@SNYBUFVA.BITNET> DEC has retired all software for their first attempt at the PC market, the Rainbow 100. The machine is designed to operate with either of two systems: CP/M (I have ver. 2.0 (1.1)), or MS-DOS (I've got ver 3.0). I'd appreciate any lines leading to Fortran software and manuals for this unit. Thanks for your time. Mark. Mark Tarka (grad student & chemist on a VAX 6610 VMS Ver. 5.5) Chemistry Dept.;Buffalo State College; 1300 Elmwood Ave.; Buffalo, NY, 14222-1095; USA. (716)878-6686. TARKA10@SNYBSCVA ------------------------------ Date: 12 Jan 93 01:41:43 GMT From: elroy.jpl.nasa.gov!usc!howland.reston.ans.net!zaphod.mps.ohio-state.edu!swrinde!news.dell.com!milano!cactus.org!wixer!fmouse@ames.arc.nasa.gov (Lindsay Haisley) Subject: Re: .lbr???? Anyone? Message-ID: <1993Jan12.014143.14815@wixer.cactus.org> In article <1993Jan7.220114.2364@daimi.aau.dk> u920659@daimi.aau.dk (Carsten S|rensen) writes: >As I'm a complete newbie in cp/m ... I'd like to know what the extension >.lbr is? I guess it's some kind of archive but I haven't had the luck to >find an unarchiverfor it. Where can I get it (ftp)? And which sites have >a lot of cp/m stuff? The .LBR format is an archive format without compression used frequently for bundling of CP/M program components which are usually compressed before being archived. You will want to look for the programs LU, NULU, LGET, DELBR (or DE-LBR) or LT (Library Typer, also capable of extraction) to extract files from a LBR archive. If the files within the LBR archive have the filespec *.?Q? you may well need the progrum USQ or UNSQUEEZ to uncompress the component files. If the files have the format *.?Z? you will need UNCR or UNCRUNCH to uncompress them. SIMTEL20 used to have an exhaustive catalog of CP/M public domain utilities available for ftp. If you are in the US, there are a number of bulletin boards which specialize in CP/M software. I suggest you contact Jay Sage's BBS at 617-965-7259 for a good selection. -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ Date: 13 Jan 93 15:31:26 GMT From: agate!spool.mu.edu!uwm.edu!cs.utexas.edu!zaphod.mps.ohio-state.edu!swrinde!emory!sol.ctr.columbia.edu!ucselx!crash!donm@ucbvax.Berkeley.EDU (Don Maslin) Subject: Re: .lbr???? Anyone? Message-ID: <1993Jan13.073126.10536@crash> It should be noted that most versions of UNCR will also unsqueeze and UNSQ is not required. The latest that I have seen - UNCRLZH - also handles that compression mode as well. - don ------------------------------ Date: 13 Jan 93 19:50:49 GMT From: agate!spool.mu.edu!torn!utzoo!censor!isgtec!gerrit@ucbvax.Berkeley.EDU (Gerrit Visser) Subject: re: hard disks for CPM Message-ID: <3992@isgtec.isgtec.com> A bit late in responding but it took me a while to find my documentation. There are several options for HD add-ons to S-100 systems. I use(d) a DTC S-100 SASI interface board connected to an OMTI controller. This gave me 2 5.25" floppies and 2 ST-506 hd's. The Xebec 1410 and Sysgen series would also work, they were all SASI interfaced. The DTC SASI interface supported DMA but the board was generally shipped with no DMA logic installed. It should be possible to use an 8255 or the like to build a polled IO SASI interface. A second option is/was the XCOMP ST/S and ST/R. The ST/S was for S-100 systems, ST/R for 'other'. The ST/R was installed by adding an adapter between the original Z80 in your CPU and the ST/R controller set. If someone is particularly interested in the SASI interface option, I have several OMTI and Xebec controllers. I still have a DTC SASI interface but the decision to get rid of it is pending :-) -- ___________________________________________________________________________ ISG Technologies Inc. | | gerrit@isgtec.com 6509 Airport Rd. | Gerrit Visser | uunet.ca!isgtec!gerrit Mississauga, ONT L4V 1S8 | | Canada | | 416-672-2100 ------------------------------ Date: 13 Jan 93 17:09:37 GMT From: pipex!pavo.csi.cam.ac.uk!tjrc1@uunet.uu.net (T.J.R. Cutts) Subject: Re: What is the legal status of CP/M? Message-ID: <1993Jan13.170937.19016@infodev.cam.ac.uk> There is still some CP/M development going on in the UK, largely for Amstrad's PCW series of Z80 word-processors. These are marketed with a wp called Locoscript, which is self-booting, although using CP/M disk format. This may have changed since I had one at home; the more recent ones have 3.5" disks, not the far less common 3" disks they originally used, and may have moved over to MS-DOS format to aid file transfer to Locoscript PC). When I had one of these machines (bought in 1984 and still going strong in 1990), it was running CP/M Plus (3.14), which I was programming using a really great suite consisting of Debugger/Disassembler, Full-screen editor, and Z80 macro assembler, called Devpac80. This was written by a company called HiSoft based in Dunstable, UK, who write and/or market a wide variety of compilers for CP/M 2.2 and later. The last catalogue I had included at least two different C compilers, Pascal, Fortan, Forth, Pilot, Modula-2, Prolog, Devpac80, and various flavours of BASIC, including Locomotive's Mallard BASIC, said to be the most powerful 8-bit BASIC around. Mallard BASIC is also bundled with Amstrad PCW machines. As far as I am aware these are still marketed (HiSoft's stall at the 1991 Computer Shopper Show had most of these for sale), and they are pretty cheap; about L35.00 per package. For serious CP/M hobbyists, they maight be worth trying to get hold of. Anyone who's interested please mail me, and I'll e-mail you HiSoft's address which I will dig out at home. Tim. ------------------------------ End of INFO-CPM Digest V93 Issue #8 *********************************** 14-Jan-93 10:18:26-MST,11242;000000000000 Return-Path: Date: Thu, 14 Jan 93 10:15:22 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #9 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930114101522.V93N9@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Thu, 14 Jan 93 Volume 93 : Issue 9 Today's Topics: LBR Files and Compression Re: diseased Kaypro/Wordstar Re: INFO-CPM Digest V93 #8, FORTRAN for the DEC Rainbow. Re: Osborne1 disk translation help Re: Test Test Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: Thu, 14 Jan 93 10:01:59 -0500 From: Jay Sage Subject: LBR Files and Compression Message-ID: <9301141001.AA20940@LL.MIT.EDU> Lindsay Haisley's list of tools for dealing with LBR archives containing compressed files omitted my favorite: LBREXT. This program will extract member files from libraries and optionally uncompress them from squeezed (*.?q?), crunched (*.?z?), and LZH encoded (*.?y?) format. LBREXT is a full Z-System program that will work perfectly under standard CP/M as well to the extent possible. The syntax is LBREXT lbrfile[.LBR] member1[,member2,...] [/option] The LBR file name can be given with or without the LBR extension. One may give a single member file specification (which may be 'ambiguous', that is, contain '?' or '*') or a number of such specifications separated by commas. The option '/U' specifies that any matching compressed member files are to be uncompressed as they are extracted. I believe the '/O' option specifies the the extracted file(s) should overwrite any that already exist. Lindsay was nice enough to mention my Z-Node as a good source for these files. The Z-Node concentrates on files that run specifically under Z- System. I operate a second BBS (running on DOS hardware with PCBoard, two phone lines, and high-speed modems) at 617-965-7046. That BBS supports general CP/M and MS-DOS and has a directory dedicated to support of archiving and compression. At the moment, the main phone number has a v.32bis modem. If that line is busy, the connection hunts to the second line (617-965-7785) which has a USRobotics Courier HST modem. However, I am about to reverse these lines so that people with v.32bis modems can guarantee connection to my v.32bis modem by calling the second number directly. That switch may have occurred by the time you read this message. -- Jay Sage ------------------------------ Date: 11 Jan 93 02:45:18 GMT From: munnari.oz.au!ariel.ucs.unimelb.EDU.AU!werple.apana.org.au!hal9000!monty!bean!nick@uunet.uu.net (Nick Gibbs) Subject: Re: diseased Kaypro/Wordstar Message-ID: <86s6wB1w165w@bean.apana.org.au> jfarmer@cs.utk.edu (JOHN FARMER) writes: > I have a Kaypro 4'84, and I'm using Wordstar 4.0, and I have a problem > somewhere. I keep looking part of 'large-files'. What's happening is that > parts of files are disappearing only to be replaced with other (duplicate) > parts of the same file. > > The first times it happened, I was working on a large file on a full disk, > and I just assumed that when I had tried to save, and there wasn't room, that > Wordstar got lost when it stopped to tell me there wasn't any room and I had > to delete stuff to continue. The latest time it happened, I was working on > a much smaller file on a virtually empty disk. (and to make it worse, > I was dutifully saving every so often, so there was no backup file to > get the data from. I lost about 2-3 hours of work.) This rings a bell. I remember having trouble with WS4 when editing large files on a floppy based machine. Especially when inserting a block from another file. Parts of the file would disappear and other parts get scrambled. I came to the conclusion that the code just isn't as stable as previous versions. Unfortunately I can't reproduce this problem using my CP/M emulator (MYZ80) on the IBM clone, which runs CP/M 3.0. It's as stable as a rock. Nick. ------------------------------ Date: Thu, 14 Jan 93 15:10:04 IST From: "Jacques J. Goldberg" Subject: Re: INFO-CPM Digest V93 #8, FORTRAN for the DEC Rainbow. Mark Tarka asks: >DEC has retired all software for their first attempt at the PC market, >the Rainbow 100. The machine is designed to operate with either of two >systems: CP/M (I have ver. 2.0 (1.1)), or MS-DOS (I've got ver 3.0). >I'd appreciate any lines leading to Fortran software and manuals for >this unit. Thanks for your time. Mark. I have answered directly with more details, but more people than Mark might want to know that: -The DEC Rainbow has 2 processors, a Z80 which can run CP/M-80 code, and a 8086 which can run either CP/M-86 or MSDOS. -There exists a good Z80 Fortran compiler, FORTRAN-80 by Microsoft. Against a statement by Microsoft that they make/made it public, I will gladly send a copy, with the documentation which I have kept, limited to operating instructions and machine dependencies. Remember: MEMORY(Z80) =< 64Kbytes ! -Any so-called PC compiler running on a PC or XT (that is, on 8086 and 8088 processors) such as Microsoft's, Lahey's, Waterloo, and probably (not tested but very educated guess) the BCF compiler located in at SIMTEL20, will run on a Rainbow with two caveats: a) Lahey's require a 8087 coprocessor even for compilation jobs even if the program does not use any real number, b) of course no graphics library made for the PC will work. -Too many Rainbow owners have not had a chance to hear that very many packages made for the PC (XT, 8088, that is, not AT's 286/386/486, just in case you dream) will run flawless on the Rainbow. The border line is very easily defined, any package writing I/O thru BIOS calls will work, any package writing directly into the device will fail. In less cryptic language, games and packages "optimised" for speed I/O will normally fail, the rest will work. Many commercial packages (examples: KEDIT, REXX) have a documented or hidden option to enforce BIOS I/O to screen: with that option on, they do run on Rainbows, although (often very much) slower. Packages that come with customization options for various "terminals" will work on the Rainbow if installed as VT220 (memory mapped when option is available). -A few examples of free software found on SIMTEL20 with which a science student can get a lot of work out of a Rainbow 100, under MSDOS: JOVE to edit texts, TEX to produce high quality documents, SMALL-C to write in C, COMPAS to write in Pascal, almost certainly BCF for Fortran. I would bet that there IS a data base and that there IS a spreadsheet that will work, one just needs a little bit of patience to try the packages until one finds the good one. Of course there is at Columbia a version of Kermit for the Rainbow, and the Rainbow is also in any case a VT100 terminal (at least VT220 in fact). -What you really need to enjoy your Rainbow is a hard disk. With a bit of luck, the old Rainbow left over there might have 768k RAM, which could help convince those who don't believe that MSDOS does work beyond 640K (up to 1 Mb, but IBM castrated again...). Still, without a hard disk, the Rainbow is frustra- ting. Jacques Goldberg, Prof. of Physics, Technion, Haifa, Israel ------------------------------ Date: 14 Jan 93 09:35:18 GMT From: world!bmarcum@uunet.uu.net (Bill Marcum) Subject: Re: Osborne1 disk translation help Message-ID: In article <1465.544.uupcb@ehbbs.gwinnett.com> curt.tucker@ehbbs.gwinnett.com (Curt Tucker) writes: > >We have an ancient copy of Crosstalk that actually runs on the >Osborne, but we can't get it to drive an external modem. The >machine with this software did drive the modem a decade ago, but >we've completely forgotten how it was set up. Maybe a bad serial port? Maybe you need a null modem cable. I'm not sure, but it wouldn't hurt to try. > >The disks to be converted are old WordStar document files which >have both personal and professional value. The floppy drives on >this machine sound like they're grinding rocks, and it can't last >forever. You can probably replace the floppy drives with standard IBM compatible 360K drives. Bill Marcum bmarcum@world.std.com ------------------------------ Date: 14 Jan 93 14:02:53 GMT From: pipex!warwick!pavo.csi.cam.ac.uk!tjrc1@uunet.uu.net (T.J.R. Cutts) Subject: Re: Test Message-ID: <1993Jan14.140253.10934@infodev.cam.ac.uk> Tee-hee. I remember writing an entire Arkanoid clone in Z80 assembler for my Amstrad PCW8256. The code fit into 2k, including all the graphics routines I'd written, and the data for the levels took another 4k. Compare that with DOS/Windoze where the smallest program I've written was 16k (and did virtually nothing). Even worse is the Unix clone Linux, which I also run on my PC, which common to many C compilers, it seems, generates absolutely huge binaries. I have 8Mb of RAM in my PC and X Windows stumbles after only a couple of reasonable programs. The Amstrad PCW uses a banked memory system (most machines are fitted with 256k or 512k). I never managed to fill even 64k, but there you go. I never wrote in anything other than assembler, and I suppose 64k of machine code is a pretty hefty program. Now that I have a PC capable of running a Z80 emulator at the same speed as a native Z80A, I might get back into CP/M, because it's the only operating system I've ever been able to clearly understand in its entirety. I'm glad to see there's such interest in CP/M still around. Tim. ------------------------------ Date: 14 Jan 93 00:39:49 GMT From: psinntp!sugar!tghost!f-454!Usenet@uunet.uu.net (George Worley) Subject: Test Message-ID: <726974397.AA00579@f-454.fidonet.org> This is test ... "640K ought to be enough for anybody."-Bill Gates ------------------------------ End of INFO-CPM Digest V93 Issue #9 *********************************** 14-Jan-93 21:46:39-MST,11114;000000000000 Return-Path: Date: Thu, 14 Jan 93 21:45:13 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #10 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930114214513.V93N10@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Thu, 14 Jan 93 Volume 93 : Issue 10 Today's Topics: HUSKY HUNTER programmers out there? MediaMaster Re: Anyone familiar with Micro 5 Turbo 1000 system running MP/M ? Re: Attn: California Computer Systems / ZCPR3 Re: CP/M FOR TRS-80 MODEL III, 48K Re: Misc CP/M and S-100 questions, if you please. Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 15 Jan 93 02:57:43 GMT From: agate!spool.mu.edu!uwm.edu!cs.utexas.edu!usc!howland.reston.ans.net!paladin.american.edu!news.univie.ac.at!hp4at!mcsun!sunic!seunet!kullmar!piraya!shark!bozze@ucbvax.Berkeley.EDU (Bo Arnoldson) Subject: HUSKY HUNTER programmers out there? Message-ID: Hi Netters I'm a programmer (consultant) that sometimes work with the HUNTER computers from HUSKY Ltd. I'd like to know if there is anyone out in the Netiverse that would like to exchange experiences and so forth.. I code in C (Aztec) Please email me.. Regards, -- Bo Arnoldson, BoA@bad.se ------------------------------ Date: 13 Jan 93 16:14:05 GMT From: zaphod.mps.ohio-state.edu!howland.reston.ans.net!usc!cs.utexas.edu!milano!cactus.org!wixer!fmouse@uunet.uu.net (Lindsay Haisley) Subject: MediaMaster Message-ID: <1993Jan13.161405.23310@wixer.cactus.org> I have seen references to a product for DOS called MediaMaster which enables the reading and writing of files to and from a variety of CP/M floppy formats. Who puts this product out, and what is their address, phone or email address. To avoid unnecessary net traffic, let it be said that I already have 22DISK and am aware of the capabilities of Uniform-PC. The information is for a friend who is looking for a program to work with a CP/M disk format not supported on either of these products. -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ Date: 13 Jan 93 16:35:20 GMT From: zaphod.mps.ohio-state.edu!howland.reston.ans.net!usc!cs.utexas.edu!milano!cactus.org!wixer!fmouse@uunet.uu.net (Lindsay Haisley) Subject: Re: Anyone familiar with Micro 5 Turbo 1000 system running MP/M ? Message-ID: <1993Jan13.163520.23710@wixer.cactus.org> In article <1993Jan9.144150.19232@ryn.mro4.dec.com> chungh@armory.enet.dec.com (Henry Chung) writes: >One of my friends' company has a Micro 5 System running an acounting >program (written in MBASIC). The system is a multi-user system and >has 24 serial ports on the back. Since the system is very old, he >is afraid the system may die someday and lose all of his data. >He would like to replace the machine with a standard 386 compatiable PC >The Questions that I have are: > >1) Can I replace the MP/M with another multi-user operating system > such as DR. DOS mult-user version or DesQview running on top of > regular DOS ? One cannot run programs (or operating systems) designed for use on Intel 80x86 based system (MS-DOS, PC-DOS, DR-DOS, etc.) on the older 8080 or Z80 based systems (CP/M, TP/M, CP/M+ etc.) or vice versa (without and emulator). I assume the Micro 5 System falls into the latter category and that MP/M is a CP/M workalike. It is possible that one could get the programs up and running on an AT with the help of an emulator such as MYZ80, but it would probably be slower than on the Micro 5, and I'm not sure what I/O support is available in these environments. It is highly doubtful that the Micro 5's support of 24 serial ports could be translated into anything meaningful in a DOS environment. >2) Will the accounting program run on DOS ? (I do have the > source code if I need to make minor modification to the program.) You may be able to translate the BASIC programs into GWBASIC or another dialect which will run under DOS. BASIC is not as easily transported as C or other languages which were designed work across different platforms, so I'm not sure how "minor" the modifications will be, and, depending on the complexity of the programs, the job may turn you into a BASIC expert, assuming you have the time for the required research. From a cost/time point of view, the most economical solution might well be for your friend to print out as much data as possible from your old system and then reenter it manually into one of the excellent accounting packages available for use in a DOS environment. If necessary, you may be able to move the data files and source code from your Micro 5 to an AT on floppies using Uniform-PC from MicroSolutions or 22DISK from Sydex, both of which are excellent products for the purpose. -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ Date: 14 Jan 93 04:04:38 GMT From: agate!spool.mu.edu!darwin.sura.net!paladin.american.edu!howland.reston.ans.net!usc!cs.utexas.edu!milano!cactus.org!wixer!fmouse@ucbvax.Berkeley.EDU (Lindsay Haisley) Subject: Re: Attn: California Computer Systems / ZCPR3 Message-ID: <1993Jan14.040438.21094@wixer.cactus.org> In article schriste@uceng.uc.edu (Steven Christensen) writes: > I have a CCS system with the CCS CPU and the CCS FDC. I want >to put ZCPR3 on it, but am having problems modifying my BIOS to do >the necessary initialization. The documentation mentions that I may >get some help from others who have put ZCPR3 on their CCS systems. I'm not familiar with the CCS system but have installed ZCPR33 and ZCPR34 on Kaypro systems. I don't recall that any BIOS modifications are required (although it's been some time since I've done the job). ZCPR3 is essentially a CCP replacement and (especially in the case of ZCPR34 with NZ-COM) should require only the initialization of the ZCPR3-specific data structures which describe your system layout. -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ Date: 14 Jan 93 17:59:11 GMT From: agate!spool.mu.edu!uwm.edu!caen!uvaarpa!concert!sas!mozart.unx.sas.com!sasrer@ucbvax.Berkeley.EDU (Rodney Radford) Subject: Re: CP/M FOR TRS-80 MODEL III, 48K Message-ID: R3DRS@VM1.CC.UAKRON.EDU writes: >I have recently aquired a TRS-80 Model III, but with no software (other than a >couple bootable TRSDOS V1.2 with nothing else useful on them). Knowing that >CP/M was a very popular replacement for TRDOS, i am interested in finding some >sort of version of this operating system so i might make some use of this >machine. Could someone point me to a source for something i could use? >I did find something that looked promising that came with a Z80 emulator for >MS DOS, but i think that it might be for a 64K system (mine is 48K). Is there >a good CP/M source available through the internet? Also, how about software? > > Thanks in advance, Dave Snyder r3drs@vm1.cc.uakron.edu > A stock (non-modified) TRS-80 Model III will not run CP/M as RS used the lower 14K for EPROMs, memory mapped I/O space, and video memory. I have heard of modifications to the Model III that will remap these into the upper 16K (basically remap the top two address lines), and then some other hardware to handle the initial hardware boot (ie: a shadow EPROM at 0 that can be mapped out, or something). Anyway, CP/M can run on it, but you must get your soldering iron out (Or be lucky enough to locate one of the retrofit kits for the Model III that just plugged in - I think it was a daughter board that plugged into the Z80 socket, with the Z80 relocated to the daughter board). The TRS-80 Model IV, and the portable (actually more of a 'luggable') IVP could run TRSDOS or CP/M. Maybe you could locate one of these.... Good luck. PS: Rereading the above, I realized that I assume that you know that CP/M requires a contiguous RAM area starting at address $0000. Just thought I would point it out for the CP/M newbies... ;-} -- --- Rodney Radford || Computer Graphics/Imaging sasrer@unx.sas.com || SAS Institute, Inc. (919) 677-8000 x7703 || Cary, NC 27513 ------------------------------ Date: 14 Jan 93 04:09:08 GMT From: agate!spool.mu.edu!uwm.edu!cs.utexas.edu!milano!cactus.org!wixer!fmouse@ucbvax.Berkeley.EDU (Lindsay Haisley) Subject: Re: Misc CP/M and S-100 questions, if you please. Message-ID: <1993Jan14.040908.21299@wixer.cactus.org> In article bmarcum@world.std.com (Bill Marcum) writes: >You don't have to keep the system disk in A:. You just need a bootable disk >with a copy of PIP or similar utility ..... Any bootable disk in CP/M has the system on the system tracks and is by definition a "system disk". Such a disk must remain in his A: drive during a warm boot. -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ End of INFO-CPM Digest V93 Issue #10 ************************************ 15-Jan-93 21:48:18-MST,10340;000000000000 Return-Path: Date: Fri, 15 Jan 93 21:45:33 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #11 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930115214533.V93N11@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Fri, 15 Jan 93 Volume 93 : Issue 11 Today's Topics: MediaMaster Re: Anyone familiar with Micro 5 Turbo 1000 system running MP/M ? Re: INFO-CPM Digest V93 #10, Media Master RE: MediaMaster (3 msgs) Re: Osborne1 disk translation help Re: ZCPR3 on California Computer Systems Machine Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: Fri, 15 Jan 93 12:50:50 -0500 From: Jay Sage Subject: MediaMaster Message-ID: <9301151250.AA18204@LL.MIT.EDU> >> I have seen references to a product for DOS called MediaMaster ... Who >> puts this product out, and what is their address, phone or email address. The publisher is: Intersecting Concepts 4573 Heatherglen Court Moorpark, CA 93021 805-529-5073 CIS: 72145,1147 This is the information that appears in my manual. I have not spoken to the company (or used my copies of MediaMaster) in many years, so I have no idea whether they are still in business at that address, or at all. >> The information is for a friend who is looking for a program to work with >> a CP/M disk format not supported on either of these products. What is that format? I can see if my copy of MM supports it. Another approach would be to develop a custom format specification for 22DISK. If you have one of these diskettes, you can use Sydex's ANADISK program to analyze the disk and learn some things about its format structure. Building a definition table for 22DISK is not intrinsically difficult. ------------------------------ Date: 15 Jan 93 12:40:41 GMT From: pipex!pavo.csi.cam.ac.uk!tjrc1@uunet.uu.net (T.J.R. Cutts) Subject: Re: Anyone familiar with Micro 5 Turbo 1000 system running MP/M ? Message-ID: <1993Jan15.124041.2801@infodev.cam.ac.uk> As far as I am aware, MP/M is a multi-user version of CP/M with many extra features, such as scheduling, print spooling and so on. We used to have a network of Z80 machines at school, all connected to a Z80 fileserver (wow... such speed!) running MP/M. It also had a relocatable form of executable, .PRL files rather than .COM I presume these were a forerunner of MS-DOS .EXE executables. Digital Research did the same trick with DR-DOS and produced Concurrent DOS for PC's. Tim. ------------------------------ Date: Fri, 15 Jan 93 10:50:11 IST From: "Jacques J. Goldberg" Subject: Re: INFO-CPM Digest V93 #10, Media Master I do have a CP/M version (which I use from time to time on a DEC Rainbow). I couldn't instantly find the box and the book. If the info is still needed, write to me directly with the format you are looking for, I'll boot up the old Rainbow to check. My bet however is that you will save time and money by asking at large what are the 22DSK parameters for the diskette you want to read; adjusting 22DSK is then trivial. Jacques phr00jg@technion.technion.ac.il yes two ZEROES in phr00jg ------------------------------ Date: Fri, 15 Jan 93 7:43:15 MST From: Frank Bateman USAEPG Ft Huachuca Arizona AV879-7602/6016 602-538-7602/6016 Subject: RE: MediaMaster The source for Media Master is Intersecting Concepts 4573 Heatherglen Ct. Moorpark, CA 93021 805-529-5073 Or at least that's where they were several years ago when we got our copy. Nice product, and reasonably priced -- seems like we paid $35 or so. Frank ------------------------------ Date: Fri, 15 Jan 93 14:26:09 CST From: hanscom@eid.anl.gov (roger hanscom) Subject: Re: MediaMaster Message-ID: <9301152026.AA23850@athens.eid.anl.gov> In <1993Jan13.161405.23310@wixer.cactus.org> Lindsay Haisley writes: >I have seen references to a product for DOS called MediaMaster which enables >the reading and writing of files to and from a variety of CP/M floppy >formats. Who puts this product out, and what is their address, phone or >email address. > >To avoid unnecessary net traffic, let it be said that I already have 22DISK >and am aware of the capabilities of Uniform-PC. The information is for a >friend who is looking for a program to work with a CP/M disk format not >supported on either of these products. The company is Intersecting Concepts. I don't have their address or phone number handy just now. Be careful of MediaMaster. They advertise bunches of CP/M formats, but I suggested it to a colleague of mine and after paying a very high price for the software, he found it wouldn't work for his format. He asked me to try it on some others, and I was not able to read the only 2 other formats that were on their list of formats supported, and available to me. When I tried to talk to them about the problem over the phone, they were very rude, and no help at all. As I have said before, others have tried the product and liked it. Perhaps it works with the more common formats. My experience was quite different. I use, and swear by, 22DISK. I suggest that you have your friend buy a supported copy of 22DISK. The vendor claims that they will help a user define just about any format to the program. If your friend decides to buy MediaMaster, please...please.. get him/her to try (somehow) out the particular format of interest *BEFORE* he/she writes the check roger hanscom@athens.eid.anl.gov ------------------------------ Date: 15 Jan 93 14:57:32 GMT From: crash!donm@nosc.mil (Don Maslin) Subject: Re: MediaMaster Message-ID: <1993Jan15.065732.4528@crash> Media Master is a product of: Spectre Technologies 22458 Ventura Blvd. Woodland Hills CA 91364 818/716-1655 ------------------------------ Date: 15 Jan 93 04:25:09 GMT From: sun-barr!cs.utexas.edu!milano!cactus.org!wixer!fmouse@ames.arc.nasa.gov (Lindsay Haisley) Subject: Re: Osborne1 disk translation help Message-ID: <1993Jan15.042509.8@wixer.cactus.org> In article bmarcum@world.std.com (Bill Marcum) writes: >You can probably replace the floppy drives with standard IBM compatible 360K >drives. Unfortunately (or so I'm told) the Osbornes didn't use the same drives. -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ Date: Fri, 15 Jan 93 12:47:08 -0500 From: Jay Sage Subject: Re: ZCPR3 on California Computer Systems Machine Message-ID: <9301151247.AA18104@LL.MIT.EDU> A manual installation of ZCPR3 requires some modest changes to the system BIOS. First, the BIOS must be moved down in memory to open up space for the ZCPR3 buffers (multiple command line buffer, environment buffer, path buffer, named directory register, shell stack, etc.). If MOVCPM is available, it should be able to handle that job. In addition, the buffers must be initialized. If you have the CBIOS source code, this poses no problems in principle. If you don't have source, then you have to patch into the cold boot code (before it merges, as it sometimes does, with the warm boot code). Writing this code is not difficult in principle, but putting all the pieces together -- the parts you write and the existing BIOS object code -- can be a little tricky. Fortunately, none of this is necessary any more in the overwhelming majority of cases. NZCOM takes care of everything automatically. A menu- based utility allows you to design your system configuration or configurations. If you have more than one, you can change among them without rebooting. In fact, you can change operating systems right in the middle of a multiple command sequence, which means that alias scripts can potentially do it automatically. System modules are provided in a run-time relocatable format so that nothing has to be assembled or reassembled for use at a new address. Even the command processor, BDOS, and BIOS interface modules can be reloaded while the system is running! In short, an NZCOM- created Z-System is superior to a manually installed system. There are only two drawbacks: a memory penalty of 256 bytes and a financial cost of $49. The manual that comes with NZCOM provides a minimal introduction to Z- System. The most valuable source of information is The Computer Journal magazine, where I have been writing a regular column for about six years and where several other Z-System developers and users have also published frequently. ------------------------------ End of INFO-CPM Digest V93 Issue #11 ************************************ 18-Jan-93 09:47:37-MST,10560;000000000000 Return-Path: Date: Mon, 18 Jan 93 09:45:10 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #12 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930118094510.V93N12@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Mon, 18 Jan 93 Volume 93 : Issue 12 Today's Topics: Epson QX-10 Question HDOS, anyone? (and ZCPR/ZRDOS) hp125 to commodore 128 help kaypro boot disks Re: Z80 Turbo Pascal Question Trouble with 22dsk, Xenocopy etc. Z80 Turbo Pascal Question Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 17 Jan 93 06:48:00 GMT From: haven.umd.edu!darwin.sura.net!mlb.semi.harris.com!eilc!postmaster@ames.arc.nasa.gov (Clifford Fawley) Subject: Epson QX-10 Question Message-ID: <727369678.AA00057@eilc.fidonet> On the back of the Epson QX-10 there is a set of DIP Switches. Would some on please tell me what these are for and what the settings ON/OFF will do if I were to chance them. Right now #1 is ON all others are OFF. * Origin: The Shire Scribe BBS: 1:374/1066@fidonet.org (1:374/1066) ------------------------------ Date: 15 Jan 93 22:23:10 GMT From: enterpoop.mit.edu!ira.uka.de!chx400!univ-lyon1.fr!insa-lyon.fr!ghost.dsi.unimi.it!rpi!usc!cs.utexas.edu!torn!watserv2.uwaterloo.ca!watmath!undergrad.math.waterloo.edu!cantor.math.uwaterloo. (Dennis Pejcha) Subject: HDOS, anyone? (and ZCPR/ZRDOS) Message-ID: Okay, okay, this isn't comp.os.hdos, but comp.os.hdos doesn't exist. A Heath H-89 computer will be coming into my possession shortly. I have some software for it, including CP/M 2.2.04 and HDOS 2.0. I was wondering: 1) Is there anyone out there who knows where I might get a copy of the HDOS source code? I know that it was available at one point in time, but that was several years ago. If you still have a copy that you no longer need, please let me know. 2) Does anyone know where I can get a copy of HDOS 3.0? Again, I know that it was once available (for the cost of disks and shipping!) but that was quite some time ago. Is it actually public-domain? If so, is there perhaps an ftp site that might have it? How about by snail-mail? 3) What is the status of ZCPR and ZR-DOS? I have read several postings about them, but still haven't figured out if they are public domain or commercial. Please enlighten me and include sources where I might get the full system. In the interest of netiquette, please do not post replies to the news-group. E-mail me directly and I will summarize my findings if there is sufficient interest. My e-mail address is: dpejcha@napier.uwaterloo.ca PS: Any information about other HDOS or H89-specific software would also be greatly appreciated. Thank you (in advance) one and all -D ----- __(__) Moo? (__)__ | Dennis Pejcha ( oo / oo ) | dpejcha@napier.uwaterloo.ca /\_| / |_/\ | "Studying Computer Science Moo! | 'til the cows come home" ------------------------------ Date: 18 Jan 93 07:15:53 GMT From: agate!spool.mu.edu!uwm.edu!cs.utexas.edu!asuvax!asuacad!axdwm@ucbvax.Berkeley.EDU Subject: hp125 to commodore 128 help Message-ID: <93018.001553AXDWM@ASUACAD.BITNET> I am new to CP/M and I need some help. A friend has just loaned me his Commodore 128 which has CP/M capabilities. I also have some old software from a Hewlett Packard 125 which also worked in CP/M. The problem is that the HP CP/M does not seem to work on the Commodore. I have experience using this software (although not CP/M) and would like to have available to me. Are there any tricks or converters available that would make this possible and where might I find them if they do exist. Thanks in advance. --- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< >> Daniel W. Mackle "I'm not going to be the first << >> AXDWM@ASUVM.INRE.ASU.EDU President to lose a war" << >> Soldier/Musician -Lyndon Baines Johnson, 1967 << >> -Richard Milhouse Nixon, 1972 << >>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ------------------------------ Date: Sat, 16 Jan 93 16:26:55 MDT From: Raymond Carter STEWS-NR-AD Subject: kaypro boot disks Am trying to find versions of kaypro boot disks to cover all the various models for a friend who sells electronic surplus stuff. He has several different models of kaypro cp/m machines, but no boot disks. thanks, ray carter rcarter@wsmr16.army.mil ------------------------------ Date: 17 Jan 93 16:33:56 GMT From: agate!spool.mu.edu!uwm.edu!cs.utexas.edu!milano!cactus.org!wixer!fmouse@ucbvax.Berkeley.EDU (Lindsay Haisley) Subject: Re: Z80 Turbo Pascal Question Message-ID: <1993Jan17.163356.8529@wixer.cactus.org> In article farmer@cs.utk.edu (SUSAN FARMER) writes: >If I exit the program immediately after chaining, and then SAVE the program, >will I be able to execute Step2 only (with its nicely filled arrays. >If this won't work, is there some cute trick that I can do to make it work? > >Exactly what state in program execution does the SAVE statement get it? (If >I am misunderstanding the operation of the Save statement, forgive my >obviously idiotic ramblings.) The only sure way to find out if it will work is to try it. Some programs initialize themselves in such a fashion that a reentry to the code after initialization won't work, while others are more forgiving. My experience is that among more complex programs (which include those generated with Pascal and C compilers) a successful reentry to the executed code (which is what you will be SAVEing) is the exception rather than the rule, but again, you should try it. -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ Date: 18 Jan 93 02:52:28 GMT From: mcsun!sun4nl!wtrlnd!contrast!postmaster@uunet.uu.net (Oscar Vermeulen) Subject: Trouble with 22dsk, Xenocopy etc. Message-ID: <727299604.AA01100@contrast.wlink.nl> Hi All, I have been trying to get 22disk, Xenocopy and some other, comparable CP/M disk converters to run on my 386 clone for weeks now, but they all fail to work. I spent most of my effort on 22disk, which reports a 'drive not ready' after it starts to read the CP/M disk that was supposed to be converted. The drive starts spinning for a second or so, then the error message appears and the drive stops. This happens with disks from all kinds of CP/M machines (Cromemco, Superbrain, Epson, IBM CP/M 86). It also happens when I try to format an alien disk. Once, just once, I got it working for a few minutes, but that was all. Is there something I don't know? Fidgeting with BIOS settings and drivparm didn't help me. Do you need some special disk controller? My clone is equipped with one of the newer multi I/O cards. Well, in short: Help! Groeten, Oscar ---------------------------------------------------------------------- Ask Not What Your Computer Can Do For You, | Oscar Vermeulen Ask What You Can Do For Your Computer. | Zoetermeer, Holland ------------------------------ Date: 16 Jan 93 02:56:20 GMT From: agate!usenet.ins.cwru.edu!magnus.acs.ohio-state.edu!zaphod.mps.ohio-state.edu!howland.reston.ans.net!sol.ctr.columbia.edu!ira.uka.de!yale.edu!newsserver.jvnc.net!darwin.sura.net!cs.utk. (SUSAN FARMER) Subject: Z80 Turbo Pascal Question Message-ID: Question: I want to write a two-step program in Turbo Pascal -- The question is will what I want to do work. I want Step1 to read in and fill various arrays. (The arrays are going to be relatively constant, and I am trying to avoid filling them every time I execute the program. The arrays will probably have 300-ish elements in several arrays -- to much to really fill "by hand". Besides, the data will change from time to time (it is actually Family data (birthdays, anniversaries, etc.))). Then I want to Chain (?) to Step2 which will actually run the program applications. If I exit the program immediately after chaining, and then SAVE the program, will I be able to execute Step2 only (with its nicely filled arrays. If this won't work, is there some cute trick that I can do to make it work? Exactly what state in program execution does the SAVE statement get it? (If I am misunderstanding the operation of the Save statement, forgive my obviously idiotic ramblings.) Thanks Susan -- Susan B. Farmer farmer@cs.utk.edu Lady Jerusha Kilgore I can't even find time to clean house and you want me to come up with a .sig? And now she wants to go back to grad school after 14 years ..... We'll let her out when the delusion passes. ------------------------------ End of INFO-CPM Digest V93 Issue #12 ************************************ 20-Jan-93 05:17:14-MST,11469;000000000000 Return-Path: Date: Wed, 20 Jan 93 05:15:12 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #13 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930120051512.V93N13@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Wed, 20 Jan 93 Volume 93 : Issue 13 Today's Topics: RE: 22Disk and Intertec Machines (SuperBrain & Compustar) Re: Anyone familiar with Micro 5 Turbo 1000 system running MP/M ? Re: hp125 to commodore 128 help Re: trouble with 22dsk, Xenocopy, etc. Re: Trouble with 22dsk, Xenocopy etc. Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: Wed, 20 Jan 93 7:04:02 EST From: Paul V. Pullen Subject: RE: 22Disk and Intertec Machines (SuperBrain & Compustar) Message-ID: <9301200704.aa24238@cbda7.apgea.army.mil> In his message, Oscar Vermeulen writes: >I have been trying to get 22disk, Xenocopy and some other, comparable >CP/M disk converters to run on my 386 clone for weeks now, but they all >fail to work. I spent most of my effort on 22disk, which reports a >'drive not ready' after it starts to read the CP/M disk that was >supposed to be converted. The drive starts spinning for a second or so, >then the error message appears and the drive stops. >This happens with disks from all kinds of CP/M machines (Cromemco, >Superbrain . . . . This one I can answer, because I first had this problem with my Intertec Compustar (relatives of the SuperBrain). I found I had to format the Compustar disk on the DOS machine with 22Disk's CFMT /com3 Du: command, but then could easily read and write the data from the Intertec computers. The CP/M machine does not write the proper header on the DOS disk for the DOS machine to recognize that there is a disk there. Try to format the disk on the DOS machine, and then copy files to it. I have had beautiful luck with this technique. (Kaypro format works fine from the Kaypro, it must set up the 'boot track' that the DOS machine recognizes that it has a formated disk in it). Paul Pullen -------------------------------------------------------------------------- Paul V. Pullen U. S. Army Edgewood Research, Development & Engineering Center Research & Technology Department Aberdeen Proving Grounds, MD DDN Mailbox Comm 1-410-671-2519 pvpullen@apgea.army.mil -------------------------------------------------------------------------- ------------------------------ Date: 18 Jan 93 14:13:39 GMT From: utcsri!geac!censor!isgtec!gerrit@uunet.uu.net (Gerrit Visser) Subject: Re: Anyone familiar with Micro 5 Turbo 1000 system running MP/M ? Message-ID: <4016@isgtec.isgtec.com> Lindsay Haisley (fmouse@wixer.cactus.org) wrote: : based systems (CP/M, TP/M, CP/M+ etc.) or vice versa (without and emulator). : I assume the Micro 5 System falls into the latter category and that MP/M is : a CP/M workalike. It is possible that one could get the programs up and MP/M is actually a multi-programing version of CP/M. It uses bank switching methods so that multiple 48k or more banks are used for seperate tasks. Works quite well. The Micro 5 must have a bunch of memory in it. : You may be able to translate the BASIC programs into GWBASIC or another : dialect which will run under DOS. BASIC is not as easily transported as C : or other languages which were designed work across different platforms, so MBASIC is a direct predecessor to GWBASIC. On the BMC IF800 (Z80 CP/M) one could move programs to a PC with no conversion required (unless of course one was using specific escape sequences for screen formatting.) The biggest challenge is probably discerning whether MP/M features were used in the programs in which case effort is required to convert. It is not likely that MBASIC knew about MP/M though. ___________________________________________________________________________ ISG Technologies Inc. | | gerrit@isgtec.com 6509 Airport Rd. | Gerrit Visser | uunet.ca!isgtec!gerrit Mississauga, ONT L4V 1S8 | | Canada | | 416-672-2100 ------------------------------ Date: 18 Jan 93 17:54:57 GMT From: agate!spool.mu.edu!darwin.sura.net!aplcen.apl.jhu.edu!wb3ffv!idsssd!bruce@ucbvax.Berkeley.EDU (Bruce T. Harvey) Subject: Re: hp125 to commodore 128 help Message-ID: <1993Jan18.175457.2054@idsssd.UUCP> in article <93018.001553AXDWM@ASUACAD.BITNET>, says: > > ... some stuff deleted but working on a Commodore w/HP-125 software ... > ... Are there > any tricks or converters available that would make this possible and where > might I find them if they do exist. Thanks in advance. Having delved into the HP-125 myself as a self-training course in how an operating system works, I'll wager you're running into some problems with function keys and screen paging. HP made their CP/M quite specific to the machine and made use of several 'pages' of screen memory, as well as ANSI screen display logic, and multiple-use function keys. As far as I could tell, they never intended it to be used often as a standalone CP/M machine, but rather as a "word processor/Basic Programming/ Spreadsheet" machine. The specifics of the hardware is probably what is killing you. Best of luck in getting it to work ... I don't think you will. -- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Bruce T. Harvey {B-}) ::: UUCP: ... {uunet|mimsy}!wb3ffv!idsssd!bruce MGR-Applications Dvlpmt::: INTERNET: wb3ffv!idsssd!bruce%uunet.uu.net@... INSIGHT Dist. Sys. - AD:::CompuServe: 71033,1070 (410)329-1100 x312,x352::: SnailMail: 222 Schilling Cir.,Hunt Valley, MD 21031 :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: ------------------------------ Date: Tue, 19 Jan 93 12:43:46 GMT From: Christopher Currie Subject: Re: trouble with 22dsk, Xenocopy, etc. Message-ID: <3848.9301191243@clus1.ulcc.ac.uk> >------------------------------ > >Date: 18 Jan 93 02:52:28 GMT >From: mcsun!sun4nl!wtrlnd!contrast!postmaster@uunet.uu.net (Oscar Vermeulen) >Subject: Trouble with 22dsk, Xenocopy etc. >Message-ID: <727299604.AA01100@contrast.wlink.nl> > >Hi All, > >I have been trying to get 22disk, Xenocopy and some other, comparable >CP/M disk converters to run on my 386 clone for weeks now, but they all >fail to work. I spent most of my effort on 22disk, which reports a >'drive not ready' after it starts to read the CP/M disk that was >supposed to be converted. The drive starts spinning for a second or so, >then the error message appears and the drive stops. > >This happens with disks from all kinds of CP/M machines (Cromemco, >Superbrain, Epson, IBM CP/M 86). It also happens when I try to format an >alien disk. Once, just once, I got it working for a few minutes, but >that was all. > >Is there something I don't know? Fidgeting with BIOS settings and >drivparm didn't help me. Do you need some special disk controller? My >clone is equipped with one of the newer multi I/O cards. > >Well, in short: Help! I have had no trouble with 22disk installed on a 486 clone. But I did have to reinstall it - I had originally copied it over from my previous XT, and that installation gave problems. If you have been using an incomplete 22disk from a friend's machine, that may be the problem. Get the full current version from Simtel20. You may need the registered version for some formats. The registered version has more formats than the shareware version. Make sure that the specifications for the drives and other features of your system are set correctly when you install 22disk. Alternatively the problem could be with your drive cache or PC speed. If you have a turbo switch, try switching it so that the computer is set on 'slow' (i.e. AT) speed. If you use Smartdrv or another drive cache, try altering the buffering settings for the floppy drive. (I have not found that a turbo setting caused problems for 22disk, but I have found that a program designed to read TRS-80 disks on older PCs could not read the floppies unless the turbo was set OFF, and moreover could not format alien disks unless the write cache for the floppy drive was switched ON.) There are other tricks that sometimes work, such as covering the index hole on the floppy with a write-protect tab. Christopher Currie ccurrie@clus1.ulcc.ac.uk ------------------------------ Date: 18 Jan 93 14:41:43 GMT From: agate!spool.mu.edu!howland.reston.ans.net!usc!cs.utexas.edu!natinst.com!news.dell.com!milano!cactus.org!wixer!fmouse@ucbvax.Berkeley.EDU (Lindsay Haisley) Subject: Re: Trouble with 22dsk, Xenocopy etc. Message-ID: <1993Jan18.144143.13052@wixer.cactus.org> In article <727299604.AA01100@contrast.wlink.nl> oscar@contrast.wlink.nl (Oscar Vermeulen) writes: >I have been trying to get 22disk, Xenocopy and some other, comparable >CP/M disk converters to run on my 386 clone for weeks now, but they all >fail to work. I spent most of my effort on 22disk, which reports a >'drive not ready' after it starts to read the CP/M disk that was >supposed to be converted. The drive starts spinning for a second or so, >then the error message appears and the drive stops. Are you operating under any sort of multitasking software (MS-Windows, DesqView, etc.)? If so, you should exit your multitasking environment and run under plain MS-DOS. 22DISK (and probably similar software as well) makes system calls which are not supported under some multitasking environments. If this isn't the case, I have found Sydex to be friendly and helpful with problems. Contact them at: SYDEX P.O. Box 5700 Eugene, OR 97405 USA Voice: 503-683-6033 FAX: 503-683-1622 BBS: 503-683-1385 -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ End of INFO-CPM Digest V93 Issue #13 ************************************ 22-Jan-93 17:46:58-MST,9169;000000000000 Return-Path: Date: Fri, 22 Jan 93 17:45:50 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #14 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930122174550.V93N14@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Fri, 22 Jan 93 Volume 93 : Issue 14 Today's Topics: 8080/8085/Z80 Code Identifier AZTEC C Borland's Turbo Modula-2 Did AZTEC C V1.05g produce 8080 or Z80 ? How to convert a MP/M tape to UNIX? Re: Did AZTEC C V1.05g produce 8080 or Z80 ? (2 msgs) Re: Epson QX-10 Question (2 msgs) Re: Turbo Pascal Question Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 21 Jan 93 02:35:15 GMT From: pa.dec.com!engage.pko.dec.com!nntpd.lkg.dec.com!sousa.tay.dec.com!msdsws.enet.dec.com!secrist@decuac.dec.com (Strong datatypes for weak minds.) Subject: 8080/8085/Z80 Code Identifier Message-ID: <2411@sousa.tay.dec.com> Not that it'd be hard to write, but does anybody have some code you can feed a random .COM file to and have it tell you whether or not it's pure 8080, 8085, or Z80 code ? Regards, rcs ------------------------------ Date: 21 Jan 93 17:19:47 GMT From: elroy.jpl.nasa.gov!sdd.hp.com!hpscit.sc.hp.com!icon.rose.hp.com!hpchase.rose.hp.com!gregh@ames.arc.nasa.gov (Greg Holdren) Subject: AZTEC C Message-ID: I have vers 1.05x and 1.06c. Both have CC 8080 compiler and CZ Z80 compiler. Greg ------------------------------ Date: 22 Jan 93 09:28:44 GMT From: enterpoop.mit.edu!eru.mt.luth.se!lunic!sunic!mcsun!fuug!news.funet.fi!butler.cc.tut.fi!lehtori.cc.tut.fi!not-for-mail@ucbvax.Berkeley.EDU (Kentt{l{ Marko) Subject: Borland's Turbo Modula-2 Message-ID: <1joeocINN8l6@cc.tut.fi> Where I could get one ? -- Marko Kentt{l{ (Kenttala) E-Mail : kent@cc.tut.fi, kent@ee.tut.fi Paununkatu 5 Phone : 931 - 560 467 33700 Tampere Finland MAKE MY DAY ------------------------------ Date: 21 Jan 93 02:38:08 GMT From: pa.dec.com!engage.pko.dec.com!nntpd.lkg.dec.com!sousa.tay.dec.com!msdsws.enet.dec.com!secrist@decuac.dec.com (Strong datatypes for weak minds.) Subject: Did AZTEC C V1.05g produce 8080 or Z80 ? Message-ID: <2412@sousa.tay.dec.com> I think it was Z-80... rcs ------------------------------ Date: 20 Jan 93 22:08:45 GMT From: mcsun!sun4nl!relay.philips.nl!philce!add@uunet.uu.net (Ad Dijkhoff) Subject: How to convert a MP/M tape to UNIX? Message-ID: <1993Jan20.220845.22103@philce.ce.philips.nl> Hello netlanders, I'm having a bit trouble converting a tape written on a PHILIPS P3800 Turbo-DOS (MP/M) system to a more familiar format like tar. The tape has been written using the "savestr" command on the MP/M system. I don't know if this is a standard MP/M command, but it gives the possibility to write a disk partition to 1/4" tape. I don't have any more information on this command or the format of the data. I want to read the tape onto my SUN. I do get data off the tape, but not in any understandable format. So I am looking for a MP/M utility to write a tape in a known format, or for a UNIX utility to read the tape and convert it. If there is no such utility I have to use 5.25" floppies and I will need one of the utilities I have been reading about in this newsgroup like 22DISK. Is there a ftp site where I can get me a copy of 22DISK? Any HELP appreciated. TIA and regards, Ad Dijkhoff (add@ce.philips.nl) -- Ad Dijkhoff. | postmaster@ce.philips.nl Philips Consumer Electronics BV. | Building SK-4 CE Automation - C&SS | PO-box 80002, 5600 JB, Eindhoven. E-mail: add@ce.philips.nl | tel: (0)40-732346 ------------------------------ Date: 22 Jan 93 02:31:18 GMT From: munnari.oz.au!metro!basser.cs.su.oz.au!swift!otc!tbird2!glenns@uunet.uu.net (Glenn Satchell) Subject: Re: Did AZTEC C V1.05g produce 8080 or Z80 ? Message-ID: secrist@msdsws.enet.dec.com (Strong datatypes for weak minds.) writes: >I think it was Z-80... >rcs There were two copies of the compiler supplied: cii <- produced 8080 code czii(?) <- produced Z-80 code for pure z80 you also needed to recompile the libraries using the z80 compiler. instructions on how to do this were provided. regards, -glenn -- -- Glenn Satchell glenn%ups.uucp@fourx.Aus.Sun.COM | Uniq Professional Services Pty Ltd ACN 056 279 335 | or for the moment PO Box 70, Paddington, NSW 2021, (Sydney) Australia | glenns@nms.otca.oz.au Phone: +61-2-360-7434 Fax: +61-2-331-2572 | Phone: +61-2-339-3843 ------------------------------ Date: 22 Jan 93 16:52:55 GMT From: usc!cs.utexas.edu!tamsun.tamu.edu!tamuts!jdb8042@uunet.uu.net (John Donald Baker) Subject: Re: Did AZTEC C V1.05g produce 8080 or Z80 ? Message-ID: <1jp8p7INNb29@tamsun.tamu.edu> Well, I have Aztec C 1.06d and I have two versions of the compiler. 'CC' generates 8080 code only 'CZ' generates Z80 code in 'extended Intel' format As someone once pointed out, the Z80 compiler really doesn't take full advantage of the Z80's instruction set. I ran a small program through both and didn't see any difference in the output. Besides, the library routines would have to all be in 8080 code anyway. John D. Baker ->An Apple CardZ180 Z-System nut// Internet: JDB8042@{tamuts|rigel|sigma|summa|zeus|venus}.tamu.edu JDB8042@blkbox.com jdbaker@taronga.com UUCP: nuchat!blkbox!jdb8042 ...!taronga!jdbaker BBSs: JOHN BAKER on Z-Node #45 [(713) 937-8886], The Vector Board [(716) 544-1863], PIC of the Mid-Town [(713) 527-8939] Karnage: "Do not be the clever guy with ME! You are not qualified!" ------------------------------ Date: 20 Jan 93 06:17:26 GMT From: paladin.american.edu!howland.reston.ans.net!zaphod.mps.ohio-state.edu!menudo.uh.edu!uuneo!sugar!tghost!f-454!Usenet@gatech.edu (George Worley) Subject: Re: Epson QX-10 Question Message-ID: <727517422.AA00632@f-454.fidonet.org> -=> Quoting Clifford Fawley to All on 17 Jan 93 01:48:00 <=- Hi Clifford Fawley, CF> On the back of the Epson QX-10 there is a set of DIP Switches. Would CF> some on please tell me what these are for and what the settings ON/OFF CF> will do if I were to chance them. Right now #1 is ON all others are CF> OFF. This is the correct setting for the QX-10 - the DIP switches was used only by a tech. to anoylize the computer. Playing with the switches will on cause the QX-10 not to boot. George ... *FLASH* Energizer bunny arrested, charged with battery! ------------------------------ Date: 21 Jan 93 19:35:28 GMT From: agate!spool.mu.edu!uwm.edu!zaphod.mps.ohio-state.edu!usc!sol.ctr.columbia.edu!ucselx!crash!cwr@ucbvax.Berkeley.EDU (Will Rose) Subject: Re: Epson QX-10 Question Message-ID: <1993Jan21.113528.12@crash> Clifford Fawley (Clifford.Fawley@f1066.n374.z1.fidonet.org) wrote: : On the back of the Epson QX-10 there is a set of DIP Switches. I don't know the default settings, but the switches are buffered straight onto the data bus, and appear when you read I/O port 18H. After that it's all down to the software... Hope this help - Will ------------------------------ Date: Wed, 20 Jan 93 09:26:51 -0500 From: Jay Sage Subject: Re: Turbo Pascal Question Message-ID: <9301200926.AA10152@LL.MIT.EDU> SUSAN FARMER asked about writing "a two-step program in Turbo Pascal." Her scheme sounded problematical to me. If it fails, another approach would be to keep the initialization data in a file and have the Turbo program read it in. Changing that data would be easier that way, too. You could even have an option within the program to write out its data to a file. ------------------------------ End of INFO-CPM Digest V93 Issue #14 ************************************ 24-Jan-93 11:17:02-MST,9524;000000000000 Return-Path: Date: Sun, 24 Jan 93 11:15:26 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #15 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930124111526.V93N15@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Sun, 24 Jan 93 Volume 93 : Issue 15 Today's Topics: did aztec c v1.05g Leftover CPM stuff Re: 8080/8085/Z80 Code Identifier (4 msgs) trouble with 22dsk, Xenocopy, etc. Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 23 Jan 93 19:47:19 GMT From: uunet.ca!canrem!dosgate!dosgate![larry.moore%canrem.com]@uunet.uu.net (larry moore) Subject: did aztec c v1.05g Message-ID: <1993Jan23.4443.3377@dosgate> z Newsgroup: comp.os.cpm z Message-ID: <2412@sousa.tay.dec.com> z Subject: Did AZTEC C V1.05g produce 8080 or Z80 ? Don't know about 1.05g, but the 1.06d manual says the difference is the addition of two register variables (from two to four). | {canrem, dciem}!lfergus!larry | Nanet CP/M conference chair person. | | CP/M UUCP/mail(using David Goodenough's uucp21b on a TeleVideo 803H) | -- Canada Remote Systems - Toronto, Ontario World's Largest PCBOARD System - 416-629-7000/629-7044 ------------------------------ Date: 22 Jan 93 20:57:13 GMT From: interlan.InterLan.COM!rd1!rm1.interlan.com!browner@uunet.uu.net (Michael Browner) Subject: Leftover CPM stuff Message-ID: <492@rd1.interlan.com> This is a electronic garage sale. The reason is that all this stuff is sitting in the garage, and if it doesn't go to a new home it is gone. I post some of this once before, but I isolated out the CP/M related stuff. Anyway some items have prices, some don't, if you don't like a price please make a counter offer. If there is no price, I won't be offended by lowball offers, but I do reserve the right to make a counter offer or refuse an offer. On really low offers, buyer pays shipping, esp on cheap books. Books (best offer) MIX C and Mix Editor manuals and disks for CP/M Software Toolworks C. v3.1 A practical Guide to CP/M, Carl Townsend, 1983 How to get free Software, Glossbrenner, 1984 Computer Stuff Zorba Z80 Motherboard, partially populated, all chips socketed, Make Offer Power Supply Board for a Zorba or other computers, with docs, can be used for experimentation. $10.00 2/3 Height Cannon Drive for the Zorba, I don't know if it works $7.00 Thanx, Michael B. -- Michael Browner browner@sun1.interlan.com or (305) 846-6848 browner@rd1.interlan.com Racal-Milgo, MS E-112, P.O.Box 407044, Ft Lauderdale, FL 33340 ------------------------------ Date: 23 Jan 93 00:06:35 GMT From: news!wyvern!waggen!alpha@g.ms.uky.edu (Joe Wright) Subject: Re: 8080/8085/Z80 Code Identifier Message-ID: <1993Jan23.000635.1843@waggen.twuug.com> Strong datatypes for weak minds. (secrist@msdsws.enet.dec.com) wrote: : Not that it'd be hard to write, but does anybody have some code you : can feed a random .COM file to and have it tell you whether or not it's : pure 8080, 8085, or Z80 code ? I don't suppose so. You can run the target code through a disassembler and see what you get. If you are sure you are in code and see JR to a reasonable address, it's Z80 code. If you see only JP (JMP) instructions is is probably 8080 code. 8085 is identical to 8080 code except for the SIM/RIM instructions (8085). Most CP/M applications are written in 8080 code so as to function equally well on 8080/8085/Z80 cpu's. -- Joe Wright alpha@waggen.twuug.com "Jose' can you C?" ------------------------------ Date: 23 Jan 93 04:20:48 GMT From: sun-barr!cs.utexas.edu!torn!utzoo!telly!druid!darcy@ames.arc.nasa.gov (D'Arcy J.M. Cain) Subject: Re: 8080/8085/Z80 Code Identifier Message-ID: <1993Jan23.042048.11708@druid.uucp> secrist@msdsws.enet.dec.com (Strong datatypes for weak minds.) writes: >Not that it'd be hard to write, but does anybody have some code you >can feed a random .COM file to and have it tell you whether or not it's >pure 8080, 8085, or Z80 code ? It may not be quite as simple as you think. How do you know if you are looking at code, data or random garbage? What you want is a superset of a disassembler and those generally need a lot of user interventioon. Consider the following: (This is based on actual code) ... call print db 'Hello, world', CR, LF, 0 mov a, b ... The print function would pull the string off the stack, print it and adjust the stack pointer before returning. How would you determine the start of data there and if you did how would you know where it ended? If you are lucky someone has already written what you want. If not, this is not a knock-off project by any means. -- D'Arcy J.M. Cain (darcy@druid.com) | D'Arcy Cain Consulting | There's no government Toronto, Ontario, Canada | like no government! +1 416 424 2871 DoD#0082 | ------------------------------ Date: 23 Jan 93 15:53:42 GMT From: world!bmarcum@uunet.uu.net (Bill Marcum) Subject: Re: 8080/8085/Z80 Code Identifier Message-ID: I would just add that a Z80 disassembler would see the 8085 SIM and RIM instructions as Z80 instructions (which ones? anybody?). So, if the code contained those instructions but no other Z80 instructions, then it would be 8085 code. Bill Marcum ------------------------------ Date: 23 Jan 93 22:17:12 GMT From: agate!spool.mu.edu!howland.reston.ans.net!usc!sol.ctr.columbia.edu!news.unomaha.edu!cwis!winslade@ucbvax.Berkeley.EDU (John Winslade) Subject: Re: 8080/8085/Z80 Code Identifier Message-ID: alpha@waggen.twuug.com (Joe Wright) writes: >: Not that it'd be hard to write, but does anybody have some code you >: can feed a random .COM file to and have it tell you whether or not it's >: pure 8080, 8085, or Z80 code ? >I don't suppose so. You can run the target code through a disassembler >and see what you get. If you are sure you are in code and see JR to >a reasonable address, it's Z80 code. If you see only JP (JMP) instructions >is is probably 8080 code. 8085 is identical to 8080 code except for >the SIM/RIM instructions (8085). Most CP/M applications are written >in 8080 code so as to function equally well on 8080/8085/Z80 cpu's. There's a trick I SORTA remember which uses the Z80's additional overflow capability of the parity flag. I can't remember the specifics, but trying this on an 8080/8085 and a Z80 will yield different results. MVI A,80H SUI 81H ;; force an overflow JPO WHATEVER If I remember correctly, the parity flag will be set on one and clear on the other, but I cannot remember offhand which one it is. Good day JSW ------------------------------ Date: 22 Jan 93 18:14:20 GMT From: agate!spool.mu.edu!howland.reston.ans.net!paladin.american.edu!news.univie.ac.at!hp4at!mcsun!sun4nl!wtrlnd!contrast!postmaster@ucbvax.Berkeley.EDU (Oscar Vermeulen) Subject: trouble with 22dsk, Xenocopy, etc. Message-ID: <727877254.AA01210@contrast.wlink.nl> Hi All, A few days ago, I wrote - >I have been trying to get 22disk, Xenocopy and some other, comparable >CP/M disk converters to run on my 386 clone for weeks now, but they all >fail to work. I spent most of my effort on 22disk, which reports a Just thought I'd summarize for any others having problems: it appears that reading 40 track disks in HD disk drives can give problems. Of course, my CP/M machines have ~10-year old drives, so alignment is not perfect anyway. Using a HD mechanism makes it even more critical. The solutions that worked for me: - use a new(er) version of 22dsk. It supports ATs these days. - use normal 360k drives, who needs these new-fangled HD things anyway :) And, best of all: - format the disks on the AT, then use these disks on the CP/M machines. 22disk will have no problems reading the disks after that. Thanks to all who helped! Groeten, Oscar ---------------------------------------------oscar@contrast.wlink.nl-- Ask Not What Your Computer Can Do For You, | Oscar Vermeulen Ask What You Can Do For Your Computer. | Zoetermeer, Holland ------------------------------ End of INFO-CPM Digest V93 Issue #15 ************************************ 26-Jan-93 08:46:58-MST,10412;000000000000 Return-Path: Date: Tue, 26 Jan 93 08:45:08 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #16 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930126084508.V93N16@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Tue, 26 Jan 93 Volume 93 : Issue 16 Today's Topics: CPM and MSDOS - disk copying. email address of amstrad wanted multi-disk cruncher + TCF 93 Newsletter wants CP/M users Re: 8080/8085/Z80 Code Identifier (2 msgs) Re: Did AZTEC C V1.05g produce 8080 or Z80 ? (2 msgs) Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 25 Jan 93 14:49:50 GMT From: pipex!warwick!dcs.warwick.ac.uk!sillywiz@uunet.uu.net (SillyWiz) Subject: CPM and MSDOS - disk copying. Message-ID: <1993Jan25.144950.18744@dcs.warwick.ac.uk> Two questions.. 1) Does anyone know where I can FTP a program to modify my CPM to let me read MSDOS 720k discs in my B: drive ? .. Tech Stuff: I'm using CPM PLUS on an Amstrad CPC6128 plus. I have 61k TPA available. The thing doesn't have to do anything fancy - just let me copy files across to my "ordinary" 170k A: drive. 2) (Probably a FAQ - if so, sorry) Does anyone have a full list of CPM system calls .. I have the simpler ones like printing chars etc but not anything more complex - please don't say RTFM..ever seen Amstrads CPM documentation ? ... 144pages of license and 5pages about how to put discs in the drives..:-) Thanks for any help, SillyWiz. (.sig down for PMing) -- ------------------------------------------------------------------------------ Thanks for your attention,no offence intended, I apologise in advance in case. --=|| sillywiz@dcs.warwick.ac.uk.the.earth.milky.way.the.universe ||=-- ------------------------------------------------------------------------------ ------------------------------ Date: 25 Jan 93 19:41:21 GMT From: agate!spool.mu.edu!uwm.edu!rpi!usc!howland.reston.ans.net!bogus.sura.net!darwin.sura.net!newsserver.jvnc.net!yale.edu!ira.uka.de!news.belwue.de!ifi!news@ucbvax.Berkeley.EDU (Weber) Subject: email address of amstrad wanted Message-ID: <1993Jan25.194121.14762@ifi.informatik.uni-stuttgart.de> Im looking for the email address of amstrad corporation. (They have manufactured the cpc/joyce homecomputers). Many thanks in advance. -- Juergen G. Weber Student am Institut fuer Informatik University of Stuttgart - Germany ------------------------------ Date: Mon, 25 Jan 93 14:14:05 EST From: Alex Bodnar STEAP-IMD 5653 Subject: multi-disk cruncher + TCF 93 Message-ID: <9301251914.aa02312@APG-9.APG-9.APG.ARMY.MIL> I need to consult the NET wisdom: 1)does anyone know if there is a cpm program for crunching, +/or squeezing that will put the output file on "MULTIPLE" diskettes. Similiar to Dos's backup command? 2) Can anyone advise me if the "Z" fest is going to be held in conjunction with the Trenton Computer Festival this year? ======================================================================== Alex M. Bodnar Jr. Amateur Radio - KA3CIM PPSEL ------------------------------------------------------------------------ Information Systems Command Software Engineering Management Division Aberdeen Proving Ground, MD DDN Mailbox DSN 298-5653 Comm 1-410-278-5653 abodnar@apg-9.apg.army.mil ======================================================================== ------------------------------ Date: 26 Jan 93 05:28:28 GMT From: rush@mnementh.metaphor.com (Ed Rush) Subject: Newsletter wants CP/M users Message-ID: <2762@cronos.metaphor.com> David McGlone publishes the "Z-Letter" for CP/M and Z-system users. He needs more subscribers to qualify for a Post Office bulk-mailing permit. To inquire about this informative, monthly publication, contact David McGlone, 149 W. Hilliard Lane, Eugene, OR 97404-3057, telephone 503-588-3563. I (the poster) am not David, but I will forward any e-mailed replies to him in Oregon. -- ------------------------------------------------------ | Ed Rush, not speaking for Metaphor, Mtn. View, CA | | UUCP: [...!{apple|decwrl}!]metaphor!rush | | Internet: rush@metaphor.com | | My Macintosh doesn't go out in the rain. | | Palace of Fine Cows: Section 126, Row B, Seats 1-2 | ------------------------------------------------------ ------------------------------ Date: Sun, 24 Jan 93 15:01:31 -0500 From: Jay Sage Subject: Re: 8080/8085/Z80 Code Identifier Message-ID: <9301241501.AA23431@LL.MIT.EDU> John Winslade asked about determining if a given COM file included Z80 or 8085 code in addition to 8080 code. A few people offered answers. One was the following: >> There's a trick I SORTA remember which uses the Z80's additional overflow >> capability of the parity flag. This is not the answer to the question at hand. It is a method of determining within a program what kind of processor it is actually running on at the time. It is often used in programs that require a Z80 to make sure they are NOT running on just an 8080 so that they can abort gracefully before they go up in flames. In fact, as one reply noted, it would be extremely difficult to determine by any simple analysis what opcodes appear in a COM file, since there is no easy way to discriminate between code and data. However, there is a rather nice way to find out if you have, of all things, a DOS machine with the 22NICE emulator. If I remember correctly, it can optionally be set up to emulate only 8080 opcodes or to emulate the full Z80 set. In the former mode, it will trap Z80 opcodes as illegal. This approach works because the emulator actually tries to execute the program, and that distinguishes between data and code. It would be possible to do the same thing under CP/M itself, namely, to write an 8080/Z80 emulator (strange to emulate a processor on the very processor that is being emulated!). In fact, it may even be that the DSD (Dynamic Screen Debugger) tool already does this (it certainly could be made to do it), since it supports an emulation mode in which it does not actually run the code (as DDT and SID do) but emulates (simulates) its operation while allowing a user routine to evaluate whatever one wishes on each step of the code. ------------------------------ Date: 26 Jan 93 13:18:58 GMT From: Richard_Plinston@kcbbs.gen.nz (Richard Plinston) Subject: Re: 8080/8085/Z80 Code Identifier Message-ID: <1029325.47938.1404@kcbbs.gen.nz> >>>> This approach works because the emulator actually >>>> tries to execute the program. But it will only execute those parts of the program that are in the execution path for the data (or other) supplied for that run. It may be that Z80 specific code only exists in parts of the program that are not executed in the conditions of the test. eg Z80 code may exist in exception code. While this approach may definately say that some particular programs do have Z80 code, the reverse may not be true, it will not be possible to say that other programs do not have Z80 code. ------------------------------ Date: 26 Jan 93 05:16:24 GMT From: aduncan@rhea.trl.OZ.AU (Allan Duncan) Subject: Re: Did AZTEC C V1.05g produce 8080 or Z80 ? Message-ID: <1993Jan26.051624.9988@trl.oz.au> From article <1jp8p7INNb29@tamsun.tamu.edu>, by jdb8042@tamuts.tamu.edu (John Donald Baker): > Well, I have Aztec C 1.06d and I have two versions of the compiler. > > 'CC' generates 8080 code only > 'CZ' generates Z80 code in 'extended Intel' format > > As someone once pointed out, the Z80 compiler really doesn't take full > advantage of the Z80's instruction set. I ran a small program through > both and didn't see any difference in the output. The IX and IY registers are used in certain cases, the nmemonics are generated with DEFB's, so that they pass through an 8080 assembler. > Besides, the library routines would have to all be in 8080 code anyway. Only if you didn't redo them in Z80 :-) Allan Duncan ACSnet a.duncan@trl.oz (+613) 253 6708 Internet a.duncan@trl.oz.au Fax 253 6664 UUCP {uunet,hplabs,ukc}!munnari!trl.oz.au!a.duncan Telecom Research Labs, PO Box 249, Clayton, Victoria, 3168, Australia. ------------------------------ Date: 26 Jan 93 03:02:16 GMT From: chad@anasazi.com (Chad R. Larson) Subject: Re: Did AZTEC C V1.05g produce 8080 or Z80 ? Message-ID: <1993Jan26.030216.8023@anasazi.com> In article <2412@sousa.tay.dec.com> secrist@msdsws.enet.dec.com (Strong datatypes for weak minds.) writes: +--------------- | I think it was Z-80... +--------------- My copy contains two compilers, and could generate either. -crl -- Chad R. Larson "I read the news today, oh boy!" -- John Lennon (602) 870-3330 ...!attmail!anasaz!chad chad@anasazi.com chad@anasaz.UUCP Anasazi, Inc. - 7500 North Dreamy Draw Drive, Suite 120, Phoenix, Az 85020 ------------------------------ End of INFO-CPM Digest V93 Issue #16 ************************************ 27-Jan-93 01:17:10-MST,11225;000000000000 Return-Path: Date: Wed, 27 Jan 93 01:15:22 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #17 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930127011522.V93N17@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Wed, 27 Jan 93 Volume 93 : Issue 17 Today's Topics: 8 inch drive questions Manx Software Systems Inc Old Timer needs help on DATAVUE Otrona Software wanted Re: 8080/8085/Z80 Code Identifier (2 msgs) Re: 8 inch drive questions Re: TCF 93 Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 26 Jan 93 16:57:16 GMT From: wilker@hopf.math.purdue.edu (Clarence Wilkerson) Subject: 8 inch drive questions Keywords: terminators, power connectors Message-ID: As I look at the pile of unused (unusable) 8" drives in one corner of my basement, I came up with a couple of questions 1) What do I need for the DIP style terminator resistors on Qume DataTrak8 DSDS drive? 2) I have a couple of fancy 1/2 height NEC 8" drives that use DC power only. What is the pin out on the power plug? I't a little 4 or 5 square pins in row connector, not the usual massive block style. 3) Does anyone have mods to a cheap PC floppy controller to let it read/write 8" drives? I'm not interested in buying a new card, but have several extra XT and AT floppy controllers to experiment with. -- Clarence Wilkerson \ Bitnet: wilker%math.purdue.edu@purccvm Prof. of Math. (topology)\ Internet: wilker@math.purdue.edu Dept. of Mathematics \ messages: (317) 494-1903, FAX 494-0548 Purdue University, \ office: (317) 494-1955 (voice/modem) W. Lafayette, Indiana 47907 \ ------------------------------ Date: 26 Jan 93 19:01:59 GMT From: BoA@bad.se Subject: Manx Software Systems Inc Keywords: Manx Message-ID: Hi all! Does anyone know if the Manx Software System inc still lives somewhere. Perhaps they have an email address. I bought their Cross compilers for MSDOS and CPM 6 months ago. I tried to fax to their fax-no 9085428, but I have not received any answers. My problem is anyhow related to converting doubles to floats. This problem only occurs with the C80 compiler. (float) (double) 6.2000 --> 6.199(...) (float) (double) 1234.5678 --> 1234.566(...) (float) (double) 300.2 --> 300.1992(...) Perhaps this has to do with the FLT80 assembler library. Compiler versions is anyhow: Aztec C80 Pass1 v4.10b 10-3-88 (C) 1982-1988 by Manx Software Systems, Inc. Aztec C80 Pass2 v4.10b 1-11-90 Aztec AS80 v4.10b 5-9-88 Regards, -- Bo Arnoldson, BoA@bad.se, 3C-BBS-tel: 08-724 95 34. ------------------------------ Date: 26 Jan 93 20:50:07 GMT From: tonyo@pendragon.CNA.TEK.COM (Tony Ozrelic) Subject: Old Timer needs help on DATAVUE Message-ID: <4274@master.CNA.TEK.COM> I got a call from a guy that thought I was a "CP/M Expert" - actually, I haven't touched a CP/M box in years! He has a DATAVUE DV80-373M2 he wants to use to do packet radio - this is a Z80 box that can handle up to 4 users (one Z80 per user). If anybody has any info on this system, email me and I will get you in touch with him - I don't normally follow this newsgroup, so email me. tonyo@master.CNA.TEK.COM ------------------------------ Date: 26 Jan 93 17:00:12 GMT From: wilker@hopf.math.purdue.edu (Clarence Wilkerson) Subject: Otrona Software wanted Message-ID: I got a used Otrona last year off the net. It must have been one of the endpoints of CP/M machine evolution. As a collector, I'm interested in finding the bundled software for it, such as the version of Wordstar set up for the function keys etc. I have the standard boot disk, thanks to Dino-Sig. -- Clarence Wilkerson \ Bitnet: wilker%math.purdue.edu@purccvm Prof. of Math. (topology)\ Internet: wilker@math.purdue.edu Dept. of Mathematics \ messages: (317) 494-1903, FAX 494-0548 Purdue University, \ office: (317) 494-1955 (voice/modem) W. Lafayette, Indiana 47907 \ ------------------------------ Date: Tue, 26 Jan 93 12:49:19 -0500 From: Jay Sage Subject: Re: 8080/8085/Z80 Code Identifier Message-ID: <9301261249.AA05480@LL.MIT.EDU> Richard Plinston added the following comment to my suggestion of using an emulator to determine the presence or absence of Z80 opcodes in a given COM file: >> But it will only execute those parts of the program that are in the >> execution path ... It may be that Z80 specific code only exists in parts >> of the program that are not executed ... This is true, and I, too, thought of that at the time I composed my message. However, I decided not to mention it, since it is highly, highly unlikely -- though not impossible -- that only 8080 opcodes would be used in the main program code while a Z80 opcode would be used in exception code. One could come up with with a program (using self-modifying code!) that would appear to have only 8080 opcodes except under arbitarily specific input conditions, and to that extent there is no way, in principle, to determine with certainty from the COM file alone that it does not and can not contain Z80 opcodes. However, I do not think that this is what the person who made the original posting was thinking about; his question was much more practical than that, and I think the emulator approach would solve his problem very nicely and easily. ------------------------------ Date: 26 Jan 93 17:04:47 GMT From: wilker@hopf.math.purdue.edu (Clarence Wilkerson) Subject: Re: 8080/8085/Z80 Code Identifier Message-ID: Jay, where can the DSD (Dynamic Screen Debugger) be obtained? -- Clarence Wilkerson \ Bitnet: wilker%math.purdue.edu@purccvm Prof. of Math. (topology)\ Internet: wilker@math.purdue.edu Dept. of Mathematics \ messages: (317) 494-1903, FAX 494-0548 Purdue University, \ office: (317) 494-1955 (voice/modem) W. Lafayette, Indiana 47907 \ ------------------------------ Date: 27 Jan 93 03:10:24 GMT From: daleg@mks.com (Dale Groves) Subject: Re: 8 inch drive questions Keywords: terminators, power connectors Message-ID: <1993Jan27.031024.8583@mks.com> In article wilker@hopf.math.purdue.edu (Clarence Wilkerson) writes: >As I look at the pile of unused (unusable) 8" drives in one corner of >my basement, I came up with a couple of questions > >1) What do I need for the DIP style terminator resistors on Qume DataTrak8 > DSDS drive? > >2) I have a couple of fancy 1/2 height NEC 8" drives that use DC power > only. What is the pin out on the power plug? I't a little 4 or 5 >square pins in row connector, not the usual massive block style. > >3) Does anyone have mods to a cheap PC floppy controller to let it read/write > 8" drives? I'm not interested in buying a new card, but have several > extra XT and AT floppy controllers to experiment with. > > >-- >Clarence Wilkerson \ Bitnet: wilker%math.purdue.edu@purccvm >Prof. of Math. (topology)\ Internet: wilker@math.purdue.edu >Dept. of Mathematics \ messages: (317) 494-1903, FAX 494-0548 >Purdue University, \ office: (317) 494-1955 (voice/modem) >W. Lafayette, Indiana 47907 \ hang 'em off your at if you have lots of8 inch disks to play with - an at 5.25 1.2MB floppy is simply a squished 8 inch drive, with one minor exception. 8 inch drives only support 77 tracks, instead of 80 (at least the ones i have used in the past only use 77 - shugart 801, for example). These drives may handle 80 tracks if you try to format them that way. if not, then try the /t and /n switches to override format's default settings. the at 1.2MB drives actually changes spindle speed and transfer rate to the same values as the old 8 inch drive double density charactistics when in high density mode. you might have to build a funny cable to go from 34 pin to 50 pin, but in general you should be able to use the 8 inch drive in place of a regular 1.2 HD drive good luck! daleg -- || // // ,'/~~\' Dale R. Groves daleg@mks.com /||/// //|' `\\\ Mortice Kern Systems Inc. (519) 884-2251 / | //_// ||\___/ 35 King St. N., Waterloo, Ont., Can. N2J 2W9 O_/ "Who knows what evil lurks in the hearts of men? ...The SHADOW Knows" ------------------------------ Date: Tue, 26 Jan 93 13:46:09 -0500 From: Jay Sage Subject: Re: TCF 93 Message-ID: <9301261346.AA06699@LL.MIT.EDU> Alex Bodnar asked: >> Can anyone advise me if the "Z" fest is going to be held in conjunction >> with the Trenton Computer Festival this year? I don't have a definitive answer yet, but I can give a tentative YES. Actually, some of us were debating whether we should have ONLY the Z Fest and skip the connection with the Trenton program. It looks now as though we will probably be going with the same format as last year -- and probably the same venue for the Z Fest. Only the purveyor of pizzas will definitely be changed! (Having pizzas delivered one at a time every ten minutes for about fifty people was not generally judged to be very satisfactory.) We do not yet have anyone who has volunteered to take responsibility for making the local arrangements. Lee Bradley did an excellent job of paving the way last year, but he doesn't want a second term. Also, I have not yet reserved a room with the Trenton organizers. The official deadline has passed, but it is probably still possible to get our room and get listed on the program. I have had major deadlines here at work that have made it impossible for me to give any serious thought to Trenton. ------------------------------ End of INFO-CPM Digest V93 Issue #17 ************************************ 28-Jan-93 05:46:44-MST,11884;000000000000 Return-Path: Date: Thu, 28 Jan 93 05:45:16 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #18 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930128054516.V93N18@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Thu, 28 Jan 93 Volume 93 : Issue 18 Today's Topics: Another QX-10 Question (HELP) Clarification: Newsletter wants CP/M users CP/M 2.2 and CP/M 3.0 Alteration guides. QX-10 question Answered (2 msgs) Re: 8 inch drive questions Re: Another QX-10 Question (HELP) Re: what means the initials CP/M ? (2 msgs) what means the initials CP/M ? Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 27 Jan 93 02:59:02 GMT From: Susan.Fawley@f1066.n374.z1.fidonet.org (Susan Fawley) Subject: Another QX-10 Question (HELP) Message-ID: <728114450.AA00083@eilc.fidonet.org> Im having trouble with the RIGHT drive. Some times when I fire this thing up the drive will work perfect, other times it will read/log onto it once, other times it will not work at all. Any segestions!!! 2) I have a MS-DOS operating system disk that does not come up with any type of a listing but there is something on the disk. Is this the disk to get the QX-10 to operate in the MS-DOS system!!! 3) there is a program on the CP/M Boot disk thats called QXPC.COM. When I run this program it locks up the computer and has a "Testing QX-PC" message. There is anouther QX program that asks if I would like to install QX-PC on the hard disk. I answered "YES" and nothing happened. I ran it again and a Warning Came up stating that QX-PC was installed. Whats going on!!!! 4) Where can I get a full set of documentation for the EPSON QX-10 all I have is a few reference book. I would appriceate any information I can get. *** Cliff *** * Origin: The Shire Scribe BBS: 1:374/1066@fidonet.org (1:374/1066) ------------------------------ Date: 26 Jan 93 23:19:18 GMT From: rush@mnementh.metaphor.com (Ed Rush) Subject: Clarification: Newsletter wants CP/M users Message-ID: <2764@cronos.metaphor.com> In article <2762@cronos.metaphor.com> rush@mnementh.metaphor.com (Ed Rush) writes: > >David McGlone publishes the "Z-Letter" for CP/M and Z-system users. >He needs more subscribers to qualify for a Post Office bulk-mailing >permit. To inquire about this informative, monthly publication, contact >David McGlone, 149 W. Hilliard Lane, Eugene, OR 97404-3057, >telephone 503-588-3563. I need to clarify: for at least one issue, David is willing to send a free issue to new people, so he can meet the postal requirement. Also, I may have been hasty to use the word "monthly". >I (the poster) am not David, but I will forward any e-mailed replies >to him in Oregon. ------------------------------------------------------ | Ed Rush, not speaking for Metaphor, Mtn. View, CA | | UUCP: [...!{apple|decwrl}!]metaphor!rush | | Internet: rush@metaphor.com | | My Macintosh doesn't go out in the rain. | | Palace of Fine Cows: Section 126, Row B, Seats 1-2 | ------------------------------------------------------ -- ------------------------------------------------------ | Ed Rush, not speaking for Metaphor, Mtn. View, CA | | UUCP: [...!{apple|decwrl}!]metaphor!rush | | Internet: rush@metaphor.com | | My Macintosh doesn't go out in the rain. | | Palace of Fine Cows: Section 126, Row B, Seats 1-2 | ------------------------------------------------------ ------------------------------ Date: 27 Jan 93 13:23:45 GMT From: matthew@cbnewsg.cb.att.com (matthew.p.western) Subject: CP/M 2.2 and CP/M 3.0 Alteration guides. Message-ID: <1993Jan27.132345.5678@cbfsb.cb.att.com> Hi, I am trying to get hold of the CP/M 2.2 Alteration Guide as referred to in the CP/M 2.2 Manual. This guide apparently details how to configure the partial BIOS of an unconfigured version of CP/M to the specific hardware on which CP/M is going to be run. I am also interested in the Alteration Guide for CP/M 3.0. I have tried contacting Digital Research UK with the aim of obtaining this documentation (and an unconfigured version of CP/M) but unfortunately DR UK do not hold any CP/M stock at all, and do not have any archives according to the representative to whom I spoke. I have written to DR US, but have not had a reply yet. I was hoping that someone in this newsgroup could help! Replys via this news group or directly to mwestern@ihlpx.att.com would be very gratefully received. Thanks Matthew Western ------------------------------ Date: 27 Jan 93 02:53:00 GMT From: Susan.Fawley@f1066.n374.z1.fidonet.org (Susan Fawley) Subject: QX-10 Question Answered Message-ID: <728114450.AA00081@eilc.fidonet.org> Thanks for the INPUT, in a previous message I was told that the present setting is the proper settings, any thing else will couse the machine not to boot. * Origin: The Shire Scribe BBS: 1:374/1066@fidonet.org (1:374/1066) ------------------------------ Date: 27 Jan 93 02:58:01 GMT From: Susan.Fawley@f1066.n374.z1.fidonet.org (Susan Fawley) Subject: QX-10 question Answered Message-ID: <728114450.AA00082@eilc.fidonet.org> Thanks for the help!!! I was not about to do anything with out knowing what it is I'm messing with. In case you wandering why Cliff is not answering that is becouse this IS Cliff and I loged in on my wifes time. REAL SMART OF ME!!!! * Origin: The Shire Scribe BBS: 1:374/1066@fidonet.org (1:374/1066) ------------------------------ Date: 27 Jan 93 19:52:03 GMT From: aclark@netcom.com (Al Clark) Subject: Re: 8 inch drive questions Keywords: terminators, power connectors Message-ID: <1993Jan27.195203.27936@netcom.com> In article wilker@hopf.math.purdue.edu (Clarence Wilkerson) writes: >As I look at the pile of unused (unusable) 8" drives in one corner of >my basement, I came up with a couple of questions > >1) What do I need for the DIP style terminator resistors on Qume DataTrak8 > DSDS drive? > >2) I have a couple of fancy 1/2 height NEC 8" drives that use DC power > only. What is the pin out on the power plug? I't a little 4 or 5 >square pins in row connector, not the usual massive block style. > >3) Does anyone have mods to a cheap PC floppy controller to let it read/write > 8" drives? I'm not interested in buying a new card, but have several > extra XT and AT floppy controllers to experiment with. Can't help with 1 and 2, but the AT 1.2 Mbyte format is supposed to be hardware and software compatible with the 8" drive double sided double density format. Haven't actually hooked one up myself, but I'd be interested to know what results you get. Note that the cable is not the same, so you have to figure out an adapter. Good luck. -- Al - aclark@netcom.com - My opinions are my own. ------------------------------ Date: 28 Jan 93 03:03:03 GMT From: cwr@crash.cts.com (Will Rose) Subject: Re: Another QX-10 Question (HELP) Message-ID: <1993Jan27.190303.22503@crash> Susan Fawley (Susan.Fawley@f1066.n374.z1.fidonet.org) wrote: > >Im having trouble with the RIGHT drive. Some times when I fire this >thing up the drive will work perfect, other times it will read/log >onto it once, other times it will not work at all. Any segestions!!! > I recently had this problem, and it turned out to be the drive cable to motherboard IDC connector. But a number of different connectors and indeed problems with the drives themselves would give this effect. In the end I made up a set of extension cables so I could run the machine dismantled, and swapped cables until the fault went away. Then I attacked the duff cable. >2) I have a MS-DOS operating system disk that does not come up with any >type of a listing but there is something on the disk. Is this the disk to >get the QX-10 to operate in the MS-DOS system!!! > >3) there is a program on the CP/M Boot disk thats called QXPC.COM. When >I run this program it locks up the computer and has a "Testing QX-PC" >message. There is anouther QX program that asks if I would like to >install QX-PC on the hard disk. I answered "YES" and nothing happened. >I ran it again and a Warning Came up stating that QX-PC was installed. >Whats going on!!!! > You have the software, but not (probably) the hardware for the TITAN QX-PC MSDOS Coprocessor Board, which may still be available. It costs around $400 and is almost useless. I use mine as a 500KB ramdisk under CP/M, where it is marginally effective. (Needless to say, it was in the machine when I got it). Check the slots to see you haven't got the board installed, and then ditch the software. I don't know where you can get documentation now Snyderscope has folded. I find odds and ends at swapmeets, but that's about all. Hope this helps - Will cwr@crash.cts.com ------------------------------ Date: 27 Jan 93 20:05:57 GMT From: aclark@netcom.com (Al Clark) Subject: Re: what means the initials CP/M ? Message-ID: <1993Jan27.200557.29798@netcom.com> In article <799@muller.loria.fr> cardeira@loria.crin.fr (Cardeira Carlos) writes: > >Can anyone tell me what exactely means the initials CP/M >(Control Process/Machine ?) CP/M stands for "Control Program/Monitor." - Osborne 1 User's Reference Guide, REV: 2/22/82, page 48 Another book I have says it's Control Program for Microcomputers. My copies of DR books supplied with an early Kaypro are packed away so I don't know what DR says. -- Al - aclark@netcom.com - My opinions are my own. ------------------------------ Date: 28 Jan 93 03:01:03 GMT From: cwr@crash.cts.com (Will Rose) Subject: Re: what means the initials CP/M ? Message-ID: <1993Jan27.190103.21875@crash> Cardeira Carlos (cardeira@loria.crin.fr) wrote: : : Can anyone tell me what exactely means the initials CP/M : (Control Process/Machine ?) Thom Hogan says that it stands for "Control Program/Monitor", and the first line of the DR manual is "CP/M is a monitor control program for microcomputer system development..." so he's probably right. Will cwr@crash.cts.com ------------------------------ Date: 27 Jan 93 14:10:57 GMT From: cardeira@loria.loria.fr (Cardeira Carlos) Subject: what means the initials CP/M ? Message-ID: <799@muller.loria.fr> Can anyone tell me what exactely means the initials CP/M (Control Process/Machine ?) ------------------------------ End of INFO-CPM Digest V93 Issue #18 ************************************ 29-Jan-93 21:17:33-MST,12256;000000000000 Return-Path: Date: Fri, 29 Jan 93 21:15:29 MST From: INFO-CPM-REQUEST@WSMR-SIMTEL20.ARMY.MIL Reply-To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Subject: INFO-CPM Digest V93 #19 To: INFO-CPM@WSMR-SIMTEL20.ARMY.MIL Message-ID: <930129211529.V93N19@WSMR-SIMTEL20.ARMY.MIL> Precedence: Bulk INFO-CPM Digest Fri, 29 Jan 93 Volume 93 : Issue 19 Today's Topics: BDOS calls How to convert a MP/M tape to UNIX? Need CP/M terminal emulator Need MS-DOS (MSPRO) for CompuPro 8/16 Re: CP/M 2.2 and CP/M 3.0 Alteration guides. Re: what means the initials CP/M ? (3 msgs) Televideo TS 803 Info-CPM@WSMR-SIMTEL20.Army.Mil is an automated, unmoderated digest of messages collected from a Usenet feed or submitted directly for redistribution. The messages are presented as-is, except for header reduction. The products mentioned and the opinions expressed in these messages do not necessarily imply an endorsement by anyone or any agency involved in the redistribution of these messages. Although the digest originates at WSMR-SIMTEL20.Army.Mil, it is distributed as DIST-CPM by LISTSERV@RPITSVM. Please use the mailing list server to add or delete yourself from the list. If you wish to unsubscribe, send e-mail (from the same address where you were when you subscribed) to LISTSERV@RPITSVM if you are on BITNET, or LISTSERV@VM.ITS.RPI.EDU if you are on the Internet, with this command in the body of the message: SIGNOFF DIST-CPM ---------------------------------------------------------------------- Date: 28 Jan 93 20:51:00 GMT From: pbricker@rdth2.rdth.luc.edu (Preston Bricker) Subject: BDOS calls Message-ID: <28JAN199314510485@rdth2.rdth.luc.edu> I cannot find who requested it, but here are CP/M BDOS functions as best as I can read Sol Libes' pocket guide. Func # Value Passed Value Returned in C reg in DE or E reg in A or HL reg Peripheral I/O 0 00 system reset -- -- 1 01 console read -- char 2 02 console write E=char -- 3 03 reader read -- char 4 04 punch write E=char -- 5 05 list write E=char -- 6 06 direct con IO (V2.x) E=FFh (input) char E=char (output) 0=not ready 7 07 get IOBYTE -- IOBYTE 8 08 set IOBYTE E=IOBYTE 9 09 print string string addr -- 10 0A read console buffer addr of data buffer -- 11 0B get console status -- 00h=not ready FFh=ready Disk I/O 12 0C lift head (V1.x) -- -- get version (V2.x) -- HL=vers no. 13 0D reset disk** E=drive no. -- 14 0E select disk E=drive no. -- 15 0F open file - -- 16 10 close file |-FCB addr 17 11 search for file - -dir 18 12 search for next | -- -| 00h valid, FFh not found 19 13 delete file | -* 20 14 read next record |-FCB addr 21 15 write next record | 22 16 create file - dir; FFh=disk full 23 17 rename file old file FCB addr dir; FFh=disk full 24 18 get login vector -- (V1.4) HL=drive code 25 19 get disk number -- A=cdn 26 1A set DMS addr. DMA addr -- 27 1B get alloc. vector -- HL=alloc vector V2.x only 28 1C write protect -- -- 29 1D get R/O vector -- HL=R/O vector 30 1E set file attrib. FCB addr dir code 31 1F get addr. disk parms. -- HL=disk parm blk addr 32 20 get/set user code E=FFh (get) current code E=user code (set) -- 33 21 read random error code*** 34 22 write random -|FCB addr error code*** 35 23 compute file size -|r0,r1,r2 fmt random record field set 36 24 set random record random record field set V2.2 & later 37 25 reset drive drive vector 0 40 28 write random zero fill FCB addr return code not used 38 26 39 27 * V1.4 none ** V1.4 initializes system and selects A drive *** error codes 01 - reading unwritten data 03 - cannot close current extent 04 - seek to unwritten extent 05 - directory overflow (write only) 06 - seek past physical end of disk char=character addr=address dir =directory code cdn =current drive number (A=0) dpba=disk parameter block address pbricker@rdth2.rdth.luc.edu ------------------------------ Date: 28 Jan 93 15:53:34 GMT From: Richard_Plinston@kcbbs.gen.nz (Richard Plinston) Subject: How to convert a MP/M tape to UNIX? Message-ID: <1029327.57214.7610@kcbbs.gen.nz> >>> it was written using the "savestr" on MP/M It is likely that the tape is a simple block stream of the disc partition. That is, it is a series of blocks in the same order that they appear on the disc from where they come. Somewhere at the start of the tape will be the directory entries then the data blocks as found. Each file will not be contiguous but will be scattered throughout the tape identifiable only by following the directory entries. A restore of the tape to a suitable disc using appropriate s/w would be required. Of course I may be entirely wrong. cheers ------------------------------ Date: 28 Jan 93 06:07:46 GMT From: grant@cobber.cord.edu (WhiteShadow) Subject: Need CP/M terminal emulator Message-ID: <1993Jan28.060746.3428@cobber.cord.edu> I need a good terminal emulator that will support the vt series of terminals for a Kaypro 2 running CP/M. If anyone has such a beast or knows of where I could get it I would be very grateful. I thought I should put the machine to some good use. Thanks Chris -- ------------------------------------------------------------------------------- Christopher K. Grant| Oh, Spot, the complex |Internet:grant@cobber.cord.edu Concordia College | complex levels of behavior| cgrant@vax.cord.edu Moorhead, Minnesota | you display connote a |Northern Lights Cooperative ------------------------------ Date: 28 Jan 93 02:23:28 GMT From: reif@cs.ucf.edu (Robert Reif) Subject: Need MS-DOS (MSPRO) for CompuPro 8/16 Message-ID: <1993Jan28.022328.8953@cs.ucf.edu> I'm looking for a product called MSPRO from Computer House which allows MSDOS to be run on a CompuPro 8/16 computer. The product consists of a boot PROM (for a Disk1A) and a system disk (8 inch). If anyone has one of these that they would like to get rid of, please get in touch with me. Thanks. Robert Reif reif@eola.cs.ucf.edu (407) 678-7668 ------------------------------ Date: 29 Jan 93 02:03:11 GMT From: fmouse@wixer.cactus.org (Lindsay Haisley) Subject: Re: CP/M 2.2 and CP/M 3.0 Alteration guides. Message-ID: <1993Jan29.020311.11779@wixer.cactus.org> In article <1993Jan27.132345.5678@cbfsb.cb.att.com> matthew@cbnewsg.cb.att.com (matthew.p.western) writes: >I am trying to get hold of the CP/M 2.2 Alteration Guide as referred to >in the CP/M 2.2 Manual. This guide apparently details how to configure >the partial BIOS of an unconfigured version of CP/M to the specific hardware >on which CP/M is going to be run. If you can find a copy, pick up The Programmer's CP/M Handbook, by Andy Johnson-Laird (Osborn/McGraw Hill, ISBN 0-88134-103-7). It's an excellent reference on the subject, having two chapters devoted to writing a BIOS with a lot of programming examples. >I have written to DR US, but have not had a reply yet. I was hoping that >someone in this newsgroup could help! In case you haven't heard, DR US was recently bought out by Novell, so I suspect that they are in a pretty serious state of transition right now. -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ Date: 28 Jan 93 06:58:05 GMT From: regnad@hal.gnu.ai.mit.edu (Paul Prescott) Subject: Re: what means the initials CP/M ? Message-ID: <1k805tINNgo7@life.ai.mit.edu> Back in 1980, when I was still in school I was told CP/M stands for Control Program for Microprocessors, and the CP/M books I have over here say the same thing. (Don't tell me CP/M has become so ancient that no one even knows what the letters stand for!) :) Paul Prescott regnad@gnu.ai.mit.edu ------------------------------ Date: 28 Jan 93 11:36:32 GMT From: druid!darcy@ucbvax.Berkeley.EDU (D'Arcy J.M. Cain) Subject: Re: what means the initials CP/M ? Message-ID: <1993Jan28.113632.9838@druid.uucp> cardeira@loria.crin.fr (Cardeira Carlos) writes: >Can anyone tell me what exactely means the initials CP/M Control Program for Microcomputers. -- D'Arcy J.M. Cain (darcy@druid.com) | D'Arcy Cain Consulting | There's no government Toronto, Ontario, Canada | like no government! +1 416 424 2871 DoD#0082 | ------------------------------ Date: 29 Jan 93 02:12:51 GMT From: fmouse@wixer.cactus.org (Lindsay Haisley) Subject: Re: what means the initials CP/M ? Message-ID: <1993Jan29.021251.12135@wixer.cactus.org> In article <799@muller.loria.fr> cardeira@loria.crin.fr (Cardeira Carlos) writes: > >Can anyone tell me what exactely means the initials CP/M >(Control Process/Machine ?) According to The CP/M Bible (Waite & Angermeyer, H.W. Sams & Co) it means "Control Program for Microprocessors". DR, in their official manual, does not explain the acronym. -- "Everything works if you let it" | Lindsay Haisley -- The Roadie | fmouse@wixer.cactus.org | * * * * | Austin, Texas, USA ------------------------------ Date: 28 Jan 93 07:18:53 GMT From: regnad@hal.gnu.ai.mit.edu (Paul Prescott) Subject: Televideo TS 803 Message-ID: <1k81ctINNgvt@life.ai.mit.edu> Two days ago I was given a Televideo TS 803 with boot disk and some other software. I already really like the machine, due to its graphics capability and not one, but two serial ports, and I've broken the barrier of transfers to and from it, but I've also come up with some questions that the user's manual doesn't answer. What is an STI? I haven't found an overlay for MEX or ZMP for this machine and the reason seems to be this STI. I gather it somehow replaces the Z80 CTC, but none of my data books lists something called an STI. The manual mentions expandability to 128K and there is, indeed, a row of extra memory sockets, but no mention is made as to the method of using this extra memory. (I have the chips to plug in if there is some kind of built in bank switching and I find out how to use it.) There is a 40 pin header on the circuit board labeled "HARD DISK". Is this for a piggyback controller, or will the machine directly support the appropriate hard disk? (I strongly suspect the former, but I have to ask anyway.) :) Answers to any of these questions, or any suplimentary info on the TS 803 will be most welcome. Paul Prescott regnad@gnu.ai.mit.edu ------------------------------ End of INFO-CPM Digest V93 Issue #19 ************************************