3-Jul-85 00:28:37-MDT,642;000000000000 Return-Path: <@anl-mcs.ARPA:ukma!stan@anl-mcs> Received: from anl-mcs.ARPA by SIMTEL20.ARPA with TCP; Wed 3 Jul 85 00:24:40-MDT Return-Path: Received: by anl-mcs.ARPA ; Wed, 3 Jul 85 01:25:08 cdt Received: by ukma.UUCP (4.12/4.7) id AA01431; Mon, 1 Jul 85 22:19:13 edt Date: Mon, 1 Jul 85 22:19:13 edt From: ukma!stan@anl-mcs (David M. Allen) Message-Id: <8507020219.AA01431@ukma.UUCP> To: anlams!northstar-users@SIMTEL20.ARPA (northstar-users@SIMTEL20.ARPA) Subject: Horizon operating systems and upgrades Try Fischer Computer Systems, 445 Bay Street, Angwin, CA 94508 Phone (707) 965-2414 David Allen 9-Jul-85 19:52:00-MDT,991;000000000000 Mail-From: WANCHO created at 9-Jul-85 19:51:44 Date: Tue, 9 Jul 1985 19:51 MDT Message-ID: From: "Frank J. Wancho" To: NORTHSTAR-USERS@SIMTEL20.ARPA Subject: Earth TurboSlave I and Horizon I have recently purchased two TurboSlave I cards, intending to use one in each of two Horizons I have and network them together. Both cards work very well in one system, but will not reset in the other. That other system (used) appears to have an ancient motherboard (the system also randomly locks up, but that's another story and a clue). The question for the day is: does anyone have access to some old dealer notes to see if there was a fix to the reset (and the hang) problem(s) that was fixed in a later rev of the board? As best as I figure, this is the original motherboard, s/n 05007F, retrofitted with a power supply mod to support more than 5 slave cards (an off-board heat sink). Thanks, Frank